Trapezoidal Metal Sheet/Sandwich Panel/Imitation tile
MiniRail 60 Set
Product number:
2004596
Short rail for mounting solar modules on trapezoidal sheet metal roofs. Higher rail for the installation of optimisers and higher rear ventilation. Includes thread-forming screws with (diameter 6 mm). sealing washer. Material: Aluminium EN AW-6063 T66, EPDM, stainless steel A2
BasicRail 22
Product number:
2004279
Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 5.95 m. Material: Aluminium EN AW-6063 T66
MultiRail 15
Product number:
2004868
Short rail with static confirmation in K2 Base. For direct mounting in landscape orientation on sheet metal roofing. Length: 150 mm. Material: Aluminium EN AW-6063 T66, EPDM.
MultiRail High
Product number:
2004704
The MultiRail High is a short rail with increased installation height for better rear ventilation of the modules. For direct mounting in horizontal module orientation on trapezoidal sheet metal roofing. Length: 150 mm, height 100 mm. Material: Aluminium EN AW-6063 T66, EPDM.
MultiRail High CSM
Product number:
2004706
The MultiRail High CSM is a short rail with increased installation height for better rear ventilation of the modules. For direct mounting in horizontal module orientation on corrugated sheet metal roofing. Length: 150 mm, height 100 mm. Material: Aluminium EN AW-6063 T66, EPDM.
MultiRail 25
Product number:
2002793
Short rail with static confirmation in K2 Base. For direct mounting in landscape orientation on sheet metal roofing. Length: 250 mm. Material: Aluminium EN AW-6063 T66, EPDM
MultiRail 10
Product number:
2001300
Short rail with static confirmation in K2 Base. For direct mounting in landscape orientation on sheet metal roofing. Length: 100 mm. Material: Aluminium EN AW-6063 T66, EPDM
MiniRail MK2 Set
Product number:
2004211
Short rail for mounting solar modules on trapezoidal sheet metal roofs. Including thread-forming screws with sealing washer (diameter 6 mm). Material: Aluminium EN AW-6063 T66, EPDM, stainless steel A2
InsertionRail 2.0 - 30; 5.70 m
Product number:
2004339
The InsertionRail 2.0 is ideal for mounting solar modules with a frame height of 30 mm and is suitable for both pitched roof mounting and façade mounting. With the uncomplicated use of the CrossConnector 2.0, it can be easily mounted on any K2 mounting rail. It also enables direct integration into the BasicClip, similar to the functionality of the BasicRail. This versatile insertion rail makes installation even more efficient and customisable. Material: Aluminium EN AW 6063 T66
SolidRail UltraLight
Product number:
2004266
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 5.95 m. Material: aluminium EN AW-6063 T66
InsertionRail 2.0 - 40; 5.70 m, black anodised
Product number:
2004335
The InsertionRail 2.0 is ideal for mounting solar modules with a frame height of 40 mm and is suitable for both pitched roof and façade mounting. With the uncomplicated use of the CrossConnector 2.0, it can be easily mounted on any K2 mounting rail. It also enables direct integration into the BasicClip, similar to the functionality of the BasicRail. This versatile insertion rail makes installation even more efficient and customisable. Material: Aluminium EN AW 6063 T66, black anodised. Eloxal may show slight signs of scratching due to packaging and transport.
InsertionRail 2.0 - 30, black anodised
Product number:
2004316
The InsertionRail 2.0 is ideal for mounting solar modules with a frame height of 30 mm and is suitable for both pitched roof mounting and façade mounting. With the uncomplicated use of the CrossConnector 2.0, it can be easily mounted on any K2 mounting rail. It also enables direct integration into the BasicClip, similar to the functionality of the BasicRail. This versatile insertion rail makes installation even more efficient and customisable. Material: Aluminium EN AW 6063 T66, black anodised. Eloxal may show slight signs of scratching due to packaging and transport.
InsertionRail 2.0 - 35; 3.65 m, black anodised
Product number:
2004331
The InsertionRail 2.0 is ideal for mounting solar modules with a frame height of 35 mm and is suitable for both pitched roof mounting and façade mounting. With the uncomplicated use of the CrossConnector 2.0, it can be easily mounted on any K2 mounting rail. It also enables direct integration into the BasicClip, similar to the functionality of the BasicRail. This versatile insertion rail makes installation even more efficient and customisable. Material: Aluminium EN AW 6063 T66, black anodised. Eloxal may show slight signs of scratching due to packaging and transport.
InsertionRail
Product number:
2004216
Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 35 mm. Material: Aluminium EN AW-6063 T66. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
InsertionRail, black anodized
Product number:
2004086
Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 30 mm. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
SolidRail Light
Product number:
2004271
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 5.95 m. Material: aluminium EN AW-6063 T66
MultiRail 4.20 m
Product number:
2000471
Aluminium mounting rail for direct module fastening or as basis for cross bracing. For direct mounting on trapezoidal sheet metal and tin roofs available in universal lengths. Easy and fast mounting by means of drilling screws. Material: Aluminium EN AW-6063 T66
SolidRail Light; 4.80 m, black anodised
Product number:
2004397
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 4.80 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.
SolidRail Medium; 4.80 m
Product number:
2004415
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66
SolidRail Alpin; 5.95 m
Product number:
2004275
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. For high span width. Length 5.95 m. Material: aluminium EN AW-6063 T66
BasicClip
Product number:
1001164
BasicClip for direct mounting the K2 BasicRail on trapezoidal sheet metal. General technical approval. Note: for each BasicClip you need 2x thread-forming screws 6x38. Material: UV-resistant glass-fibre reinforced polyamide
DomeClamp EndClamp Set 30-50
Product number:
2004561
Module end clamp set for attaching solar modules to the K2 Dome System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, stainless steel (1.4301).All DomeClamp assembly instructions
InsertionRail 2.0 CrossConnector
Product number:
2004374
The CrossConnector 2.0 set makes it easy to attach the InsertionRail 2.0 to any K2 mounting rail. The screws are located outside the mounted InsertionRail, which offers the advantage that the rail, including the CrossConnector, can still be moved vertically on the rail after mounting. All accessories required for installation are included in this set. Material: Aluminium EN-AW 6060 T66; stainless steel 1.4301; A2-70
InsertionRail 2.0 CrossConnector, black anodised
Product number:
2004375
The CrossConnector 2.0 set makes it easy to attach the InsertionRail 2.0 to any K2 mounting rail. The screws are located outside the mounted InsertionRail, which offers the advantage that the rail including the CrossConnector can still be moved vertically on the rail after mounting. All accessories required for installation are included in this set. Material: Aluminium EN-AW 6060 T66 black anodised; stainless steel 1.4301; A2-70. Anodising may show slight signs of scratching due to packaging and transport.
BasicClip CSM Adapter
Product number:
2004912
The Basic Clip CSM Adapter is an EPDM pad for underlaying and sealing the BasicClip on imitation tile sheets. Material: EPDM 45 Shore A black.
FlexAdapter
Product number:
2004914
Aluminium profile as an adapter for use in BasicRail to compensate for different angles of curvature in sloping imitation tile sheets. Material: Aluminium EN AW 6063 T66
InsertionRail CrossConnector, black anodized
Product number:
2002763
Assembly retention set to hold insertion rails on vertical profiles. Material: black anodised EN-AW 6060 T66; Stainless Steel 1.4301; A2-70. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
InsertionRail CrossConnector
Product number:
2002762
Assembly retention set to hold insertion rails on vertical profiles. Material: EN-AW 6060 T66; Stainless Steel 1.4301; A2-70. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
InsertionRail 2.0 Cover; 2.85 m, black anodised
Product number:
2004665
The InsertionRail 2.0 Cover 30 acts as a horizontal cover for the InsertionRail 2.0 for 30 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW-6063 T66, black anodised. Anodised finish may show slight signs of scratching due to packaging and transport.
InsertionRail 2.0 Cover 30; 2.85 m
Product number:
2004680
The InsertionRail 2.0 Cover 30 acts as a horizontal cover for the InsertionRail 2.0 for 30 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW 6063 T66
InsertionRail 2.0 Cover 35; 3.65 m, black anodised
Product number:
2004333
The InsertionRail 2.0 Cover 35 acts as a horizontal cover for the InsertionRail 2.0 for 35 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW 6060 T66, black anodised. Eloxal may show slight signs of scratching due to packaging and transport.
InsertionRail 2.0 RailConnector
Product number:
2004355
The InsertionRail 2.0 RailConnector enables two K2 InsertionRails 2.0 to be connected quickly and easily. The connector is simply pushed into two InsertionRails 2.0 without additional accessories to create a stable connection between the two mounting rails. Material: Aluminium EN AW-6063 T66
InsertionRail 2.0 RailConnector, black anodised
Product number:
2004322
The InsertionRail 2.0 RailConnector enables two K2 InsertionRails 2.0 to be connected quickly and easily. The connector is simply pushed into two InsertionRails 2.0 without additional accessories to create a stable connection between the two mounting rails. Material: Aluminium EN AW-6063 T66, black anodised. The anodised finish may show slight signs of scratching due to packaging and transport.
Rail connector Set BasicRail
Product number:
1003571
Rail connector set for connecting 2 K2 BasicRails. With 3 drill holes for flexible mounting. Inklusive screws (bit T25). Material: Aluminum, Stainless steel A2
Rail connector InsertionRail, black anodized
Product number:
2002765
Rail connector for quick and easy connection of two K2 InsertionRails. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
Rail connector InsertionRail
Product number:
2002764
Rail connector for quick and easy connection of two K2 InsertionRails. Material: Aluminium EN AW-6063 T66. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
Rail connector Set SolidRail UltraLight and Light
Product number:
1004107
For quick and easy connection of two K2 SolidRail XS, UltraLight or Light. Set including screws and nuts.
Rail connector Set SolidRail Medium and Alpin
Product number:
1004109
For quick and easy connection of two K2 SolidRail Medium or Alpin. Set including screws and nuts. Material: Aluminium EN AW-6063 T66 / Stainless steel A2
BasicLock 22 Set
Product number:
1003558
Mounting security for fusing the K2 BasicRail 22 in case of thermal expansion. Including screws and nuts. Material: Aluminum, stainless steel and PA.
Dome 6.10 SD
Product number:
2003243
Front module support element for the Dome 6.10 system. Material: aluminium
MiniFive MK2 Stop Set
Product number:
2003379
Set of two hexagon socket screws and two MK2 that fix MiniFive to MiniRail. Material: Stainless steel
Dome 6.10 Peak
Product number:
2004125
Component for the module elevation of the Dome 6.10 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the
BasicRail
with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66
MiniFive MK2 End
Product number:
2004213
Additional adapter as module support for the MiniRail MK2 System with an inclination of 5° for improved rear ventilation. Width: 9 cm. Material: aluminium EN AW-6063 T66
MiniFive MK2 Front
Product number:
2004212
Additional adapter as module support for the MiniRail MK2 System with an inclination of 5° for improved rear ventilation. Width: 9 cm. Material: aluminium EN AW-6063 T66
MultiAngle Support
Product number:
2002507
Support 15° for the MultiAngle System. Dimensions: 60x40x4 mm. Length: 320 mm.
MultiAngle Top flange
Product number:
2002054
Top flange with drillings to place module vertical or horizontal. Aluminium 60x40x4 mm, length 1.450 mm
K2 Clamp MC 25-40 mm
Product number:
2004146
Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.
K2 Clamp EC 25-40, black anodised
Product number:
2004545
Black anodized Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, stainless steel, Thermoplastic. Anodising may show slight signs of scratching due to packaging and transport.
Trapezoidal Metal Sheet/Sandwich Panel/Imitation tile
K2 mounting systems for trapezoidal sheet roofs without fixing the substructure are fixed with self-tapping sheet metal screws in the high beading. The SpeedRail system is the classic choice, which is suitable for nearly all situations. In some cases, the MiniRail and MultiRail systems may be suitable.
The mounting systems at a glance:
Fixation in the roofing
Fixation in the substructure
Trapezoidal Metal Sheet/Sandwich Panel/Imitation tile
Trapezoidal Metal Sheet/Sandwich Panel/Imitation tile
Trapezoidal Metal Sheet/Sandwich Panel/Imitation tile
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.