Bitumen roofing
D-Dome 6.15 Base Set
Product number:
2004500
Pre-assembled base rail set for the D-Dome 6.15 system for module widths of 960-1170 mm. Including BasicRail 2.48 m, 2 x Dome 6.15 SD, 2 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel
BasicRail 22
Product number:
2004279
Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 5.95 m. Material: Aluminium EN AW-6063 T66
D-Dome 6.10 Base Set
Product number:
2003620
Pre-assembled basic rail set for the D-Dome 6.10 system for module widths of 960-1170 mm. Including BasicRail 2.48 m, 2 x Dome 6.10 SD, 2 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel
S-Dome 6.10 Base Set
Product number:
2003621
Pre-assembled base rail set for the S-Dome 6.10 system for module widths of 960-1170 mm. Including BasicRail 1.50 m, 1 x Dome 6.10 SD, 1 x Dome 6 EndPlate and 2 x Dome Mat S. Material: aluminium, EPDM, stainless steel
S-Dome 6.15 Base Set
Product number:
2004501
Pre-assembled base rail set for the S-Dome 6.15 system for module widths of 960-1170 mm. Including BasicRail 1.82 m, 1 x Dome 6.15 SD, 1 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel
D-Dome 6.10 Base Set LS
Product number:
2004714
Pre-assembled base rail set for the D-Dome 6.10 LS system for module widths of 1134 mm. Including BasicRail 2.65 m, Dome 6.10 SD LS, Dome 6.10 MidPlate LS and Dome Mat S 380. Material: aluminium EN AW 6063 T66, EPDM Shore A 70, stainless steel
S-Dome 6.15 Base Set L
Product number:
2004176
Follow-up article: 2004501Pre-assembled basic rail set for the S-Dome 6.15 system for module widths of 1061-1170 mm. Includes
BasicRail
, Dome SD, EndPlate and Mat S. Material: Aluminium, EPDM, stainless steel
DomeClamp EndClamp Set 30-50
Product number:
2004561
Module end clamp set for attaching solar modules to the K2 Dome System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, stainless steel (1.4301).All DomeClamp assembly instructions
DomeClamp EC Black Set 30-50
Product number:
2004564
Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
RidgeConnector Set
Product number:
2004844
The K2 RidgeConnector is a ridge connector set that connects two Dome 6 module blocks across a roof ridge. The connection can be made either via the BasicRail support rails of the module groups or with an additional SingleRail as a strut at right angles across the BasicRail support rails. The set thus offers a solution for all conceivable orientations of the module field of your PV project, ensuring optimum use of solar power.The RidgeConnector is compatible with all Dome 6 variants – D-Dome and S-Dome 6.You can enquire about the design of module fields with the RidgeConnector directly from us.
K2 Buddy Dome 6.10 Set
Product number:
2004661
K2 Buddy mounting set for the K2 Dome 6.10 systems (Xpress,
Xpress LS, Classic, Classic LS). The K2 Buddy set contains two snow sensors, wired to the TopBox; BaseBox & power supply unit; cable connector; small parts for installation.
To install the K2 Buddy in combination with the Dome 6.10 Xpress or Classic systems, one of the following sets is also required:
K2 Buddy Dome Rail Set 30 mm; K2 Buddy Dome Rail Set 35 mm
K2 Buddy Dome Rail Set
Product number:
2004484
Rail set for K2 Buddy installation in the K2 Dome 6.10 Xpress and Classic systems. This set contains 4x BasicRails (380 mm); 4x Mat S, 4x rail cross connectors; 1x stiffening profile for mounting on the module frame (1300 mm); small parts. The stiffening profile is designed to reinforce the module frame (28-30 mm) and is essential for correct weight absorption.
LoadSolver
Product number:
2004782
Turned Mat S in 200mm length and sheet metal adapter. Used to optimise load distribution on flat roofs. Suitable for K2 BasicRail 22. Compatible with K2 Dome 6 systems and K2 Dome Zero systems. Material Aluminium EN AW 5754 H111, EPDM.Note: Not plannable in base; please use our planning enquiry.
Dome Mat S 380
Product number:
2003126
Mat S Support Pad. Flexible function to absorb tolerances and protect the roof cover. Suitable for K2
BasicRail. Material: EPDM
Dome 6 Connector Set
Product number:
2004123
Rail connector set as connecting element between two K2 Dome 6 Base Set. Including accessories and equipotential bonding. Material: Aluminium, stainless steel
Dome FlatConnector Set
Product number:
1006039
Rail connector set as connecting element between two K2
BasicRail
22. Screws included. Material: Aluminium
EN AW 5754 H111, stainless steel A2.
Dome 6.10 Peak LS
Product number:
2004711
Peak for elevating the modules for the Dome 6.10 Base Set LS. The peak is clicked into the pre-assembled MidPlate LS. Material: Aluminium EN AW-6063 T66
Dome 6.15 Peak
Product number:
2004174
Component for the module elevation of the Dome 6.15 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the BasicRail with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66
Dome Zero Peak
Product number:
2003123
Component for the roof-parallel module elevation of the Dome Zero system. The peak is fixed to the
BasicRail
with a socket head screw and MK2. Material: Aluminium EN AW-6063 T66
Dome 6.10 SD
Product number:
2003243
Front module support element for the Dome 6.10 system. Material: aluminium
Dome 6.10 Peak
Product number:
2004125
Component for the module elevation of the Dome 6.10 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the
BasicRail
with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66
Dome 6.15 SD
Product number:
2004175
Front module support element for the Dome 6.15 system. Material: aluminium
MultiAngle Support
Product number:
2002507
Support 15° for the MultiAngle System. Dimensions: 60x40x4 mm. Length: 320 mm.
MultiAngle Top flange
Product number:
2002054
Top flange with drillings to place module vertical or horizontal. Aluminium 60x40x4 mm, length 1.450 mm
K2 Clamp MC 25-40 mm
Product number:
2004146
Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.
K2 Clamp EC 25-40, black anodised
Product number:
2004545
Black anodized Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, stainless steel, Thermoplastic. Anodising may show slight signs of scratching due to packaging and transport.
Universal End Clamp OneEnd
Product number:
2002514
Universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM
MultiAngle Wind brace
Product number:
2000002
Wind brace for the K2 MultiAngle system. Aluminum L-profile 30x30x3, 1.50m.
DomeClamp Middle Clamp 30-50 mm, black anodized, with TerraGrif
Product number:
2005037
Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System incl. TerraGrif K2MI Duo. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
K2 TerraGrif K2MI Duo 18
Product number:
2003542
Mounting accessories for DomeClamp Moduleclamp establishing equipotential bonding of the K2 Dome 6 mounting system or for earthing the module frames.
DomeClamp End Clamp 30-50 mm
Product number:
2002559
Alternative article: 2004561Universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
DomeClamp Middle Clamp 30-50 mm
Product number:
2002558
Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
DomeClamp Middle Clamp 30-50 mm, black anodized
Product number:
2002609
Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.
DomeClamp End Clamp 30-50 mm, black anodized
Product number:
2002610
Alternative article: 2004564Black anodized universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.
S-Dome 6.10 Windbreaker LS
Product number:
2004167
K2 Windbreaker to deflect wind on the backs of the K2 S-Dome 6.10 Classic LS system. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)
S-Dome 6.15 Windbreaker
Product number:
2004180
K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.15 System. Suitable for module lengths 1799 mm - 2150 mm. Material: Steel with Magnelis ZM310 coating
S-Dome 6.15 Windbreaker LS
Product number:
2004183
K2 Windbreaker to deflect wind on the backs of the K2 S-Dome 6.15 Classic LS system. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)
S-Dome 6.10 Windbreaker
Product number:
2004103
K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System. Suitable for module dimensions from 2045 mm - 2398 mm. Material: Steel with Magnelis ZM310 coating
Dome Porter X-tra long
Product number:
2004098
For quick and universal mounting of different ballasting for K2 Dome 6 systems. Dimensions: 2450x40x60 mm. Maximum permissible ballast: 148 kg (distributed over 2 mounted dome porters). Suitable for module lengths 1998-2405 mm. Material: Aluminium EN AW 6063 T66
Dome SpeedPorter
Product number:
2002300
For ballast mounting for the K2 Dome 6 Classic flat roof system. Place two SpeedPorters at a distance from each other, depending on the size of the bricks, on the
BasicRail and place ballast (up to approx. 40 kg) on them. Material: aluminium
Dome Porter Flex
Product number:
2004157
For quick and universal mounting of different ballast systems for the K2 Dome Zero System and K2 Dome 6 LS System. Dimensions: 1365x40x40 mm. Maximum permissible ballast: 178 kg (distributed over 2 mounted Dome Porters). The Porter can be used with the Dome Zero System for module widths of up to 1320 mm and with the Dome 6 Classic LS System for module lengths of 1562-2390 mm. Please check the correct position of the module clamping points on site. Material: Aluminium EN AW 6063 T66
MK2 insertion nut with clip, Stainless steel
Product number:
1001643
The Fast-installation MK2 insertion nut can be put into the K2 rail everywhere. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: stainless steel 1.4301, TPC.
MK2 Slot nut with clip, Aluminum
Product number:
2000034
The Fast-installation M K2 slot nut can be put into the K2 rail everywhere*. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material:
Aluminium EN AW 6063 T66, Hytrel 8238-TPC.
Hexagonal socket head cap screw M8x20
Product number:
2001729
Hexagon socket head cap screw M8x20 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2
Hexagonal socket head cap screw M8x35
Product number:
2001728
Hexagon socket head cap screw M8x35 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2
Thread-forming metal screw
Product number:
1005207
Thread-tapping screw 6x25 mm for non-cutting processing, approved for sheet thicknesses (steel and aluminium) from 0.4 mm to 1.25 mm. With General approval. Certification: abZ (de), ETA (eu), ETN (fr). Material: stainless steel A2, EPDM
Self-tapping screw 4.8x20
Product number:
2003427
Alternative article: 2002937Thread-tapping screw 4.8x20 mm for S-Dome 6 Windbreaker mounting.
Solar Cable Manager
Product number:
2002870
Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm
Bitumen roofing
The K2 systems can be installed on bitumen roofing easily, quickly and without damaging the bitumen - only ballast is required.
The mounting systems at a glance:
Bitumen roofing
Bitumen roofing
Bitumen roofing
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.