K2 N-Rack System

K2 N-Rack System

Realise smaller ground-mounted systems easily without calculation? You can with pre-assembled kits from our N-Rack ground-mounted system. Two kits are available, which are mounted on concrete foundations. Both kits are designed for a configuration with 2x12 modules vertically with a 20° inclination. The kits are designed for a load of 1.75 kN/m² snow with a wind load of 0.67 kN/m² and can therefore be installed easily and conveniently in many locations. For project-specific systems (on concrete and pile-driven profiles), please send your enquiry here. 
More information here.

K2 N-Rack System

K2 N-Rack System

Technical data

N-Rack
Applicationarea Systematic outdoor installation solutions
N-Rack C or N-Rack CS?
  • N-Rack CS for module lengths up to 1,905 mm 
  • N-Rack C for module lengths from 1,905 mm

Permitted module dimensions (L×W):


  • CS: Length 1,722 - 1,905 × width 1,038 - 1,144 mm 
  • C: Length 1,906 - 2,384 × width 1,038 - 1,144 mm 
Special feature C: From a width of 1,303 mm - 2x10 PV modules instead of 2x 12 PV modules 
Further information in the data sheet.

Inclination angle
  • 20° - two rows of modules 
  • 15° - three rows of modules (only possible with pile-driven foundations)

K2 N-Rack System

Downloads

Product brochure

TerraGrif - Potential equalisation

General Assembly and Maintenance Instructions

Installation instructions N-Rack concrete foundations

DE EN

Assembly instructions N-Rack pile-driven foundations

DE EN

Checklist - Ground-mounted systems

N-Rack C Kit

EN

N-Rack CS Kit

EN

Ausschreibungstext - N-Rack

DE