K2 Dome 6 System
BasicRail 22
Product number:
2004279
Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 5.95 m. Material: Aluminium EN AW-6063 T66
DomeClamp EndClamp Set 30-50
Product number:
2004561
Module end clamp set for attaching solar modules to the K2 Dome System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, stainless steel (1.4301).All DomeClamp assembly instructions
DomeClamp EC Black Set 30-50
Product number:
2004564
Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
RidgeConnector Set
Product number:
2004844
The K2 RidgeConnector is a ridge connector set that connects two Dome 6 module blocks across a roof ridge. The connection can be made either via the BasicRail support rails of the module groups or with an additional SingleRail as a strut at right angles across the BasicRail support rails. The set thus offers a solution for all conceivable orientations of the module field of your PV project, ensuring optimum use of solar power.The RidgeConnector is compatible with all Dome 6 variants – D-Dome and S-Dome 6.You can enquire about the design of module fields with the RidgeConnector directly from us.
K2 Buddy Dome 6.10 Set
Product number:
2004661
K2 Buddy mounting set for the K2 Dome 6.10 systems (Xpress,
Xpress LS, Classic, Classic LS). The K2 Buddy set contains two snow sensors, wired to the TopBox; BaseBox & power supply unit; cable connector; small parts for installation.
To install the K2 Buddy in combination with the Dome 6.10 Xpress or Classic systems, one of the following sets is also required:
K2 Buddy Dome Rail Set 30 mm; K2 Buddy Dome Rail Set 35 mm
K2 Buddy Dome Rail Set
Product number:
2004484
Rail set for K2 Buddy installation in the K2 Dome 6.10 Xpress and Classic systems. This set contains 4x BasicRails (380 mm); 4x Mat S, 4x rail cross connectors; 1x stiffening profile for mounting on the module frame (1300 mm); small parts. The stiffening profile is designed to reinforce the module frame (28-30 mm) and is essential for correct weight absorption.
LoadSolver
Product number:
2004782
Turned Mat S in 200mm length and sheet metal adapter. Used to optimise load distribution on flat roofs. Suitable for K2 BasicRail 22. Compatible with K2 Dome 6 systems and K2 Dome Zero systems. Material Aluminium EN AW 5754 H111, EPDM.Note: Not plannable in base; please use our planning enquiry.
Dome Mat S 380
Product number:
2003126
Mat S Support Pad. Flexible function to absorb tolerances and protect the roof cover. Suitable for K2
BasicRail. Material: EPDM
Dome FlatConnector Set
Product number:
1006039
Rail connector set as connecting element between two K2
BasicRail
22. Screws included. Material: Aluminium
EN AW 5754 H111, stainless steel A2.
Dome 6.15 Peak
Product number:
2004174
Component for the module elevation of the Dome 6.15 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the BasicRail with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66
Dome 6.10 SD
Product number:
2003243
Front module support element for the Dome 6.10 system. Material: aluminium
Dome 6.10 Peak
Product number:
2004125
Component for the module elevation of the Dome 6.10 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the
BasicRail
with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66
Dome 6.15 SD
Product number:
2004175
Front module support element for the Dome 6.15 system. Material: aluminium
DomeClamp Middle Clamp 30-50 mm, black anodized, with TerraGrif
Product number:
2005037
Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System incl. TerraGrif K2MI Duo. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
K2 TerraGrif K2MI Duo 18
Product number:
2003542
Mounting accessories for DomeClamp Moduleclamp establishing equipotential bonding of the K2 Dome 6 mounting system or for earthing the module frames.
DomeClamp End Clamp 30-50 mm
Product number:
2002559
Alternative article: 2004561Universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
DomeClamp Middle Clamp 30-50 mm
Product number:
2002558
Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
DomeClamp Middle Clamp 30-50 mm, black anodized
Product number:
2002609
Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.
DomeClamp End Clamp 30-50 mm, black anodized
Product number:
2002610
Alternative article: 2004564Black anodized universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.
S-Dome 6.15 Windbreaker
Product number:
2004180
K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.15 System. Suitable for module lengths 1799 mm - 2150 mm. Material: Steel with Magnelis ZM310 coating
S-Dome 6.10 Windbreaker
Product number:
2004103
K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System. Suitable for module dimensions from 2045 mm - 2398 mm. Material: Steel with Magnelis ZM310 coating
Dome Porter X-tra long
Product number:
2004098
For quick and universal mounting of different ballasting for K2 Dome 6 systems. Dimensions: 2450x40x60 mm. Maximum permissible ballast: 148 kg (distributed over 2 mounted dome porters). Suitable for module lengths 1998-2405 mm. Material: Aluminium EN AW 6063 T66
Dome SpeedPorter
Product number:
2002300
For ballast mounting for the K2 Dome 6 Classic flat roof system. Place two SpeedPorters at a distance from each other, depending on the size of the bricks, on the
BasicRail and place ballast (up to approx. 40 kg) on them. Material: aluminium
MK2 insertion nut with clip, Stainless steel
Product number:
1001643
The Fast-installation MK2 insertion nut can be put into the K2 rail everywhere. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: stainless steel 1.4301, TPC.
MK2 Slot nut with clip, Aluminum
Product number:
2000034
The Fast-installation M K2 slot nut can be put into the K2 rail everywhere*. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material:
Aluminium EN AW 6063 T66, Hytrel 8238-TPC.
Hexagonal socket head cap screw M8x20
Product number:
2001729
Hexagon socket head cap screw M8x20 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2
Self-tapping screw with sealing washer, 6x25
Product number:
1000212
Self-tapping screw 6.0x25 with monuted sealing washer(Ø16 mm). Approved for sheet steel from 0.5 mm and for aluminium from 0.8 mm. With building approval and ETA certification. Material: stainless steel A2, EPDM
Thread-forming metal screw
Product number:
1005207
Thread-tapping screw 6x25 mm for non-cutting processing, approved for sheet thicknesses (steel and aluminium) from 0.4 mm to 1.25 mm. With General approval. Certification: abZ (de), ETA (eu), ETN (fr). Material: stainless steel A2, EPDM
Self-tapping screw 4.8x20
Product number:
2003427
Alternative article: 2002937Thread-tapping screw 4.8x20 mm for S-Dome 6 Windbreaker mounting.
Multi Monti - fastner 7.5x40/5
Product number:
2002570
Concrete screw anchor MULTI-MONTI-plus MS 7,5x40 with flange head is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. Material: carbon steel bright zinc plated, A2K
Solar Cable Manager
Product number:
2002870
Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm
PVX Singlemount
Product number:
2004879
The PVX Singlemount serves as a support for cable trays (50-300 mm wide) on the flat roof. It offers a flexible, stable and user-friendly solution for your installations. Dimensions: L 168 x W 107 x H 75 mm. Material: PE and ASA. Mesh cable tray not included.
PVX Multistrap+
Product number:
2004880
The PVX Multistrap+ serves as a support for cable trays up to 300 m wide - the M8 screw for fastening is included. Furthermore, up to 2 cable conduits with a diameter of 16-31 mm can be fixed - cable ties are included. The Multistrap+ therefore offers a flexible, stable and user-friendly solution for your installations on flat roofs. Dimensions: L 168 x W 107 x H 75 mm. Material: PE and ASA. Cable duct/cable conduits not included.
PVX Multimount
Product number:
2003137
Alternative articles: 2004879 and 2004880The UV-resistant PVX Multimount provides a multifunctional cable management system for mesh tray and/or pipes on flat roofs and is made from 80% recycled plastic. Mesh tray and/or pipes are not included. Material: PE and ASA
Cable routing Performa Mesh Tray 70x100x3000
Product number:
2004054
Performa mesh tray for cable management on the flat roof in combination with the PVX Multimount or on trapezoidal sheet metal in combination withe the PVX Minimount. Dimensions (LxWxH): 3000 x 100 x 75 mm. Wire diameter: 3,9 mm. Material: steel (zinc+)
Performa Mesh Tray Connector
Product number:
2004055
Performa mesh tray connector for article 2004054. Two connectors are required per mesh tray. Dimensions (LxWxH): 86 x 30 x 10 mm. Material: spring steel (zinc)
Dome FixPro L
Product number:
2004144
Fixing accessories for attaching the K2 Dome 6 (Classic and Xpress system) to a mounting base for roofs ≥ 3°. Depending on the mounting base, a Climber M10 or M12 and an adapter plate are required separately. Suitable for module lengths: 1448 - 2390 mm. Material: aluminium, stainless steel, PA
Climber 36/50 for roof fixture
Product number:
2003147
K2 Climber with slotted hole for fixing the K2 SingleRail or CrossRail mounting rail to the M12 hanger bolt/M12 roof anchor or as a connecting element between the flat roof mounting foot and the Dome FixPro. Material: Aluminium EN AW-6063 T66
Adapter plate M10 for roof fixture
Product number:
2002546
Adapter plate for M10 hanger bolts and roof anchors M10 in combination with the Climber M10 or as accessory part for the article Dome FixPro. Dimensions: 50x90. Material: aluminium
Dome Speed Spacer Large
Product number:
2004129
Distance tool for the K2 Dome system. Length: 2,50 m. Material: Aluminium, Acromide
Test weight for measuring the coefficient of friction
Product number:
2002620
Test weight for measuring the coefficient of friction on a roof.
PE Baseplate
Product number:
1001572
K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 600x800 mm. Material: Polyethylene. Colour of the product may differ from the picture.
StairPlate Set
Product number:
2004057
The K2 StairPlate is the perfect solution for installing Micro Inverters and Optimizers from Solar Edge, Huawei and Enphase. With the StairPlate, these devices can be easily hooked into almost all K2 mounting rails without having to screw them directly to the roof. The units are attached to the K2 StairPlate in advance with the appropriate screws and nuts. Please note the height of the modules and the units to be used. Can only be used to a limited extent when using AddOn. Material: Stainless steel
Lightning protection clamp 8mm Set
Product number:
2004922
Lightning protection clamp for clamping lightning protection cables with a diameter of 8 mm. Includes MK2 insert nut with mounting clip and M8x25 pan head screw.
Lightning protection clamp Alu 8mm - Double Set
Product number:
2002474
Alternative Article: 2002473Two Lightning protection clamp for clamping Ø 8mm lightning protection cables for universal use as a T, cross, parallel and impact clamp. Including allen bolt M8x40, 2x Washer 8,4 x 20 x 1,2 mm and Locking nuts M8.
Lightning protection clamp Alu 8mm - Set
Product number:
2002473
Alternative article: 2004922Lightning protection clamp for clamping Ø 8mm lightning protection cables. Including MK2 slot nut, Washer (8,4x20x1,2 mm) and stainless steel socket screw M8x30.
BasicRail 22
Product number:
2004276
Alternativ article: 2003460 Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 2.50 m. Material: Aluminium EN AW-6063 T66
K2 Dome 6 System
Solutions for all roof coverings. Clearly ballast-optimised system based on the latest wind tunnel standards.
- Flat roof all-rounder - solutions for all roof coverings
- Ballast-optimised system, based on the latest wind tunnel standards
- Secure anchoring with fixed connection for roofs < 10° and low load reserves
- Component-optimised system
K2 Dome 6 System
System variant
- 4 assembly steps for super-fast installation
- Time-saving alignment of the rails with the Dome Speed Spacer gauge
- Snap-in system for peaks and tool-free rail connectors
- 4 assembly steps for super-fast installatio
- Snap-in system for peaks and tool-free rail connectors
- For mounting on the long side of the module
- Only for module width 1134 mm
- Flexible row spacing
- Suitable for foil, bitumen, gravel and green roofs
- Suitable for additional elevation on trapezoidal sheeting
- For mounting on the long module side
- For module sizes up to 2390 × 1170 mm
- Based on Dome 6 Classic
K2 Dome 6 System
Technical data
| D-Dome | S-Dome | |
|---|---|---|
| Scope of application | Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs | Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs |
| Fastening type/roof fixture |
|
|
| Requirements |
|
|
| Technical specifications Base rail |
|
|
| Technical specifications Module row |
|
|
| Minimum distance to the edge of the roof | 600 mm | 600 mm |
| Inclination angle | 10°/15° | 10°/15° |
| Material |
|
|
Side views
K2 Dome 6 System
Downloads
Assembly instructions - D-Dome 6 on trapezoidal sheet metal with BasicRail System
Assembly instructions - S-Dome 6 on trapezoidal sheet metal with BasicRail System
D-Dome 6.15 Xpress
D-Dome 6.10 Classic
D-Dome 6.10 Classic on PE plate
D-Dome 6.10 Classic on trapezoidal sheet metal
D-Dome 6.10 Classic with RailUp
D-Dome 6.10 Classic on concrete block
D-Dome 6.10 Classic LS
D-Dome 6.10 Classic LS on PE plate
D-Dome 6.10 Classic LS on trapezoidal sheet metal
D-Dome 6.10 Classic LS with RailUp
D-Dome 6.10 Classic LS on concrete block
D-Dome 6.10 Xpress LS
D-Dome 6.10 Classic LS auf Betonblock
S-Dome 6.10 Xpress
S-Dome 6.10 L Xpress
S-Dome 6.10 Classic
S-Dome 6.10 Classic on PE-Plate
S-Dome 6.10 Classic on trapeze
S-Dome 6.10 Classic with RailUp
S-Dome 6.10 Classic on concrete block
S-Dome 6.10 Classic LS
S-Dome 6.10 Classic LS on PE-Plate
S-Dome 6.10 Classic LS on trapeze
S-Dome 6.10 Classic LS on MultiRail
S-Dome 6.10 Classic LS with RailUp
S-Dome 6.10 Classic LS on concrete block
S-Dome 6.15 L Xpress
S-Dome 6.15 Classic
S-Dome 6.15 Classic on PE-Plate
S-Dome 6.15 Classic on trapeze
S-Dome 6.15 Classic on concrete block
S-Dome 6.15 Classic LS
S-Dome 6.15 Classic LS on PE-Plate
S-Dome 6.15 Classic LS on trapeze
S-Dome 6.15 Classic LS on MultiRail
S-Dome 6.15 Classic LS on concrete block
D-Dome 6 mit K2 Buddy
Tender specification - K2 S-Dome 6.10
Tender specification - K2 S-Dome 6.15
Tender specification - K2 D-Dome 6.15
Tender specification - BasicRail with S-Dome 6 on Trapezoidal metal sheet
Tender specification - BasicRail with D-Dome 6 on Trapezoidal metal sheet
Tender specification - MultiRail with S-Dome 6 on Trapezoidal metal sheet
K2 Dome 6 System
Videos
Webinar (DE 14.04.2020)
Erdung, Potentialausgleich und Blitzschutz für Photovoltaik-Anlagen einfach erklärt
Webinar (DE 14.04.2020)
Erdung, Potentialausgleich und Blitzschutz für Photovoltaik-Anlagen einfach erklärt
K2 Dome 6 System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.