K2 InsertionRail System
MultiRail 25
Product number:
2002793
Short rail with static confirmation in K2 Base. For direct mounting in landscape orientation on sheet metal roofing. Length: 250 mm. Material: Aluminium EN AW-6063 T66, EPDM
InsertionRail 2.0 - 30; 5.70 m
Product number:
2004339
The InsertionRail 2.0 is ideal for mounting solar modules with a frame height of 30 mm and is suitable for both pitched roof mounting and façade mounting. With the uncomplicated use of the CrossConnector 2.0, it can be easily mounted on any K2 mounting rail. It also enables direct integration into the BasicClip, similar to the functionality of the BasicRail. This versatile insertion rail makes installation even more efficient and customisable. Material: Aluminium EN AW 6063 T66
InsertionRail 2.0 - 40; 5.70 m, black anodised
Product number:
2004335
The InsertionRail 2.0 is ideal for mounting solar modules with a frame height of 40 mm and is suitable for both pitched roof and façade mounting. With the uncomplicated use of the CrossConnector 2.0, it can be easily mounted on any K2 mounting rail. It also enables direct integration into the BasicClip, similar to the functionality of the BasicRail. This versatile insertion rail makes installation even more efficient and customisable. Material: Aluminium EN AW 6063 T66, black anodised. Eloxal may show slight signs of scratching due to packaging and transport.
InsertionRail 2.0 - 30, black anodised
Product number:
2004316
The InsertionRail 2.0 is ideal for mounting solar modules with a frame height of 30 mm and is suitable for both pitched roof mounting and façade mounting. With the uncomplicated use of the CrossConnector 2.0, it can be easily mounted on any K2 mounting rail. It also enables direct integration into the BasicClip, similar to the functionality of the BasicRail. This versatile insertion rail makes installation even more efficient and customisable. Material: Aluminium EN AW 6063 T66, black anodised. Eloxal may show slight signs of scratching due to packaging and transport.
InsertionRail 2.0 - 35; 3.65 m, black anodised
Product number:
2004331
The InsertionRail 2.0 is ideal for mounting solar modules with a frame height of 35 mm and is suitable for both pitched roof mounting and façade mounting. With the uncomplicated use of the CrossConnector 2.0, it can be easily mounted on any K2 mounting rail. It also enables direct integration into the BasicClip, similar to the functionality of the BasicRail. This versatile insertion rail makes installation even more efficient and customisable. Material: Aluminium EN AW 6063 T66, black anodised. Eloxal may show slight signs of scratching due to packaging and transport.
InsertionRail
Product number:
2004216
Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 35 mm. Material: Aluminium EN AW-6063 T66. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
InsertionRail, black anodized
Product number:
2004086
Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 30 mm. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
SolidRail Light
Product number:
2004271
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 5.95 m. Material: aluminium EN AW-6063 T66
SolidRail Light; 4.80 m, black anodised
Product number:
2004397
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 4.80 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.
SolidRail Medium; 4.80 m
Product number:
2004415
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66
Roof Hook for Pan Tile H38/124 35x6
Product number:
1000096
For fastening of K2 system parts on roofs with pantiles. Bracket with long hole for SolidRail mounting with T-bolt screw and hexagon flange nut M10. Base plate: 180x80x4 mm, Height under bracket: 38 mm, Bracket height: 69 mm, Total height: 124 mm, Bracket depth: 91 mm. Material: stainless steel (1.4016)
Roof Hook Vario 1
Product number:
1000125
Adjustable Roof Fastener SolidHook Vario 1 for Pan Tile. For fastening of K2 System parts on roofs with pan tiles. Bracket with elongated hole to fix the SolidRail with T-Bolt and nut M10. Dimension: Base plate: 150x60x5 mm, height under bracket: 43 mm, height bracket: 55-90 mm, bracket 30x6 mm, total height: 112-145 mm. Material: Stainless steel (1.4016)
Roof Hook Vario 2
Product number:
1000107
Adjustable Roof Fastener SolidHook Vario 2 for Pan Tile. For fastening of K2 System parts on roofs with pan tiles. Bracket with elongated hole to fix the SolidRail with T-Bolt and nut M10. Dimension: Base plate: 140x55x5 mm, Height under bracket: 49-58 mm, Bracket height: 57-76 mm, Total height: 128-156 mm. Material: Stainless steel (1.4016)
Roof Hook SolidHook 3S+
Product number:
2002390
Roof hooks with 3 height adjustments in the base plate (40/47/54 mm) and slotted hole in the bracket for vertical SolidRail mounting. Base plate: 124x100, Height under Bracket: 40/47/54 mm, bracket: 35x9 mm, Overall height: 123/130/137 mm. Material: Aluminium EN AW-6063 T66
Roof Hook for Pan Tile (Alpin)
Product number:
1000764
For fastening of K2 system parts on roofs with pantiles. Bracket with long hole for SolidRail mounting with T-bolt screw and hexagon flange nut M10. Dimension: Base plate: 180x80x5 mm, Height under bracket: 47 mm, Bracket height: 55 mm, Total height: 121 mm, Bracket depth: 87 mm. Material: stainless steel (1.4016)
Roof Hook SolidHook 4S+
Product number:
2002402
Roof hook with 3 height adjustments in the base plate (40/47/54 mm) and 30 mm adjustment on the bracket. Slotted hole in the bracket for vertical SolidRail mounting. Base plate: 124x100 mm, Height under bracket: 40/47/54 mm, bracket: 35x9 mm, Overall height: 120.5 - 165 mm. Material: Aluminium EN AW-6063 T66
Roof Hook for Pan Tile H47/134 30x6
Product number:
1000001
For fastening of K2 system parts on roofs with pantiles. Bracket with long hole for SolidRail mounting with T-bolt screw and hexagon flange nut M10. Base plate: 150x60x5 mm, bracket: 30x6 mm, height under bracket: 47 mm (for roof lath 30 mm height), overall height: approx. 133 mm. Material: stainless steel (1.4016)
Roof Hook for Pan Tile H38/150 35x6
Product number:
1000653
For fastening of K2 system parts on roofs with pantiles. Bracket with long hole for SolidRail mounting with T-bolt screw and hexagon flange nut M10. Base plate: 180x80x4 mm, Height under bracket: 38 mm, Bracket height: 89 mm, Total height: 150 mm, Bracket depth: 91 mm. Material: stainless steel (1.4016)
Roof Hook for Pan Tile H47/138 35x6
Product number:
1001508
Roof hooks with long bracket for fastening the K2 system parts on roofs with large-format flat tiles. Bracket with long hole for SolidRail mounting with T-bolt and nut M10. Base plate: 180x80x4 mm, bracket: 35x6 mm, height under bracket: 47 mm, length of bracket: 127 mm, total height: 138.2 mm. Material: stainless steel (1.4016)
BasicClip
Product number:
1001164
BasicClip for direct mounting the K2 BasicRail on trapezoidal sheet metal. General technical approval. Note: for each BasicClip you need 2x thread-forming screws 6x38. Material: UV-resistant glass-fibre reinforced polyamide
Roof Hook for Slate Tile
Product number:
1000373
For fastening of K2 System parts on slate roofs. Bracket with elongated hole to fix the SolidRail with T-Bolt M10. Bracket: 40x250x6 mm, Total height: 72 mm. Material: stainless steel A2 (1.4301)
Roof Hook for Coppo-Tiles
Product number:
1001068
Adjustable Roof Fastener SolidHook Coppo. For fastening of K2 System parts on roofs with Coppo-Tiles. Bracket with elongated hole to fix the SolidRail with T-Bolt and nut M10. Dimension: Base plate: 150x60x5 mm, Height under bracket: 18 mm, Bracket height: 88 - 118 mm, Total height: 123 - 153 mm, Bracket depth: 120 mm. Material: Stainless steel (1.4016)
Roof Hook for Flat Tile
Product number:
1000214
For fastening of K2 System parts on clay brick roofs with flat tile roofing. Bracket with elongated hole to fix the SolidRail with T-Bolt and Nut M10. Base plate: 40x50 mm, Height under bracket: 33 mm, Bracket height: 62 mm, Total height: 122 mm, Bracket depth: 189 mm. Material: Stainless steel A2 (1.4301)
InsertionRail 2.0 CrossConnector
Product number:
2004374
The CrossConnector 2.0 set makes it easy to attach the InsertionRail 2.0 to any K2 mounting rail. The screws are located outside the mounted InsertionRail, which offers the advantage that the rail, including the CrossConnector, can still be moved vertically on the rail after mounting. All accessories required for installation are included in this set. Material: Aluminium EN-AW 6060 T66; stainless steel 1.4301; A2-70
InsertionRail 2.0 CrossConnector, black anodised
Product number:
2004375
The CrossConnector 2.0 set makes it easy to attach the InsertionRail 2.0 to any K2 mounting rail. The screws are located outside the mounted InsertionRail, which offers the advantage that the rail including the CrossConnector can still be moved vertically on the rail after mounting. All accessories required for installation are included in this set. Material: Aluminium EN-AW 6060 T66 black anodised; stainless steel 1.4301; A2-70. Anodising may show slight signs of scratching due to packaging and transport.
InsertionRail CrossConnector, black anodized
Product number:
2002763
Assembly retention set to hold insertion rails on vertical profiles. Material: black anodised EN-AW 6060 T66; Stainless Steel 1.4301; A2-70. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
InsertionRail CrossConnector
Product number:
2002762
Assembly retention set to hold insertion rails on vertical profiles. Material: EN-AW 6060 T66; Stainless Steel 1.4301; A2-70. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
InsertionRail 2.0 Cover; 2.85 m, black anodised
Product number:
2004665
The InsertionRail 2.0 Cover 30 acts as a horizontal cover for the InsertionRail 2.0 for 30 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW-6063 T66, black anodised. Anodised finish may show slight signs of scratching due to packaging and transport.
InsertionRail 2.0 Cover 30; 2.85 m
Product number:
2004680
The InsertionRail 2.0 Cover 30 acts as a horizontal cover for the InsertionRail 2.0 for 30 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW 6063 T66
InsertionRail 2.0 Cover 35; 3.65 m, black anodised
Product number:
2004333
The InsertionRail 2.0 Cover 35 acts as a horizontal cover for the InsertionRail 2.0 for 35 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW 6060 T66, black anodised. Eloxal may show slight signs of scratching due to packaging and transport.
InsertionRail 2.0 RailConnector
Product number:
2004355
The InsertionRail 2.0 RailConnector enables two K2 InsertionRails 2.0 to be connected quickly and easily. The connector is simply pushed into two InsertionRails 2.0 without additional accessories to create a stable connection between the two mounting rails. Material: Aluminium EN AW-6063 T66
InsertionRail 2.0 RailConnector, black anodised
Product number:
2004322
The InsertionRail 2.0 RailConnector enables two K2 InsertionRails 2.0 to be connected quickly and easily. The connector is simply pushed into two InsertionRails 2.0 without additional accessories to create a stable connection between the two mounting rails. Material: Aluminium EN AW-6063 T66, black anodised. The anodised finish may show slight signs of scratching due to packaging and transport.
Rail connector InsertionRail, black anodized
Product number:
2002765
Rail connector for quick and easy connection of two K2 InsertionRails. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
Rail connector InsertionRail
Product number:
2002764
Rail connector for quick and easy connection of two K2 InsertionRails. Material: Aluminium EN AW-6063 T66. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
Rail connector Set SolidRail UltraLight and Light
Product number:
1004107
For quick and easy connection of two K2 SolidRail XS, UltraLight or Light. Set including screws and nuts.
Rail connector Set SolidRail Medium and Alpin
Product number:
1004109
For quick and easy connection of two K2 SolidRail Medium or Alpin. Set including screws and nuts. Material: Aluminium EN AW-6063 T66 / Stainless steel A2
Self-drilling wood screw Ø 8,0 mm
Product number:
2004110
Plate head wood construction screw 8x60 with ETA certification that ensures fast and secure installation without pre-drilling. Drive: T-Drive (T-40), material: A2 stainless steel. Manufacturer: HECO, Reisser or E.u.r.o. Tec.
Self-drilling wood construction screw with disc head Ø 8.0 mm - S + P
Product number:
2004450
Flange head wood screw 8x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (80 mm). Material: stainless steel A2. Manufacturer: Schäfer + Peters
Self-drilling wood construction screw with disc head Ø 8.0 mm - Reisser
Product number:
2004451
Flange head wood screw 8x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (80 mm). Material: stainless steel A2. Manufacturer: Reisser
Wood screw countersunk head 6x70/42
Product number:
1006398
Head timber screws, drilling-point and Countersunk head 6x70/42. Drive size: TX25. Material: A2
Self-drilling wood screw Ø 6,0 mm
Product number:
2004106
Flange head wood screw 6x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-25), Thread: Full thread.
Material: stainless steel A2
Self-drilling wood construction screw with disc head Ø 8.0 mm - E.u.r.o.Tec
Product number:
2003455
Flange head wood screw 8x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (48 mm). Material: Stainless steel A2. Manufacturer: Eurotec
T-Bolt 28/15 M10
Product number:
1000571
T-Bolt M10x25 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M10x25. Material: stainlesteel A2 (1.4301)
Hexagon Flange nut with serration M10
Product number:
1000042
Hexagon flange nuts with serration M10; DIN 6923 A2 M 10. The Serration prevents accidental release. Material: A2 stainless steel; Drive size:A/F 15.
Self-tapping screw 6x38
Product number:
1005193
Thread-tapping screw 6x38 mm for non-cutting processing, approved for sheet thicknesses (steel and aluminium) from 0.4 mm to 1.25 mm. With General approval. Certification: abZ (de), abZ (de)
BasicClip
, ETA (eu), MCS (gb). Material: stainless steel A2, EPDM
Solar Cable Manager
Product number:
2002870
Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm
InsertionRail CableClip
Product number:
2002767
Plastic Profilee to hold the DC wiring in the K2 InsertionRail System. Material: polycarbonate. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.
K2 InsertionRail System
Sleek design with continuous closed surface adds further robustness.
- It is suitable for roofing with pantiles, corrugated fibre cement or corrugated sheet metal and is fixed with roof hooks or hanger bolts.
- Sleek design with continuous closed surface adds further robustness
- Insertion profile provides additional frame reinforcement
- Without having to apply clamps eliminates the need for assistance ensuring lightning-fast installation
- Module wiring quick and easy
K2 InsertionRail System
Scope of application
We offer roof hooks for almost all clay tiles, pantiles and concrete tiles. 80 % of all applications can be solved with our SolidHook 3S+ or 4S+.
For plain tiles or flat concrete roof tiles we offer special roof hooks.
For corrugated roofing, such as Eternit, we offer hanger bolts for wooden substructures. They are available in many different lengths and in diameters M10 and M12.
All are equipped with a sealing and they have an abZ certification in Germany.
For the area of trapezoidal sheet metal roofing, we offer the connection with a MultiRail mounting rail. This allows you to build PV systems on almost all trapezoidal sheet metal roofs.
K2 InsertionRail System
Technical data
| InsertionRail System | |
|---|---|
| Scope of application |
|
| Fastening type / roof connection | Roof hooks, hanger bolts or MultiRail |
| Module frame heights (H) |
|
| Requirements | 7 mm spacing between insertion rails |
| Module orientation | Landscape and portrait |
| Material |
|
Possible module frame heights
H = height
K2 InsertionRail System
Downloads
K2 InsertionRail System
Videos
Webinar (EN 28.07.2021)
Tiled roofs with roof tile milling machine from Rabied Biedron Diamanttechnik GmbH
K2 InsertionRail System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.