K2 S-Dome small System
Short rail with static confirmation in K2 Base. For direct mounting in landscape orientation on sheet metal roofing. Length: 250 mm. Material: Aluminium EN AW-6063 T66, EPDM
Narrow Dome SD for the S-Dome small system. Is installed in combination with MultiRail and FlexClamp Small. Width: 40 mm. Material: Aluminium EN AW 6063 T66
Narrow Dome S1000 for the S-Dome small system. Is installed in combination with MultiRail and FlexClamp Small. Width: 40 mm. Material: Aluminium EN AW 6063 T66
Small FlexClamp assembly for use with S Dome small for mounting on trapezoidal sheet. Module frame height: 34- 50 mm. Material: Aluminium EN AW 6063 T66 / A2
The Fast-installation M K2 slot nut can be put into the K2 rail everywhere*. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: Aluminium, PA. * excluding MiniRail, MicroRail, Dome 6 and Dome V Peak
The Fast-installation MK2 insertion nut can be put into the K2 rail everywhere. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: stainless steel 1.4301, PA.
Hexagon socket head cap screw M8x20 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2
Thread-tapping screw 6x25 mm for non-cutting processing, approved for sheet thicknesses (steel and aluminium) from 0.4 mm to 1.25 mm. With General approval. Certification: abZ (de), ETA (eu), ETN (fr). Material: stainless steel A2, EPDM
K2 S-Dome small System
Suitable for flat and trapezoidal sheet metal roofs. Saves material and transport and has a secure holding force.
- Suitable on trapezoidal sheet metal for up to 15° roof pitch
- Economical material and transport
- Clever in the connection and secure in the holding force
- Perfect combination of the all-rounder component MultiRail and load-optimised slim elevations
K2 S-Dome small System
K2 S-Dome small System
Technical data
| S-Dome small System | |
|---|---|
| Scope of application |
Flat or pitched roofs ≤ 15° with trapezoidal sheet metal roofing |
| Fastening type / roof fixture | Attached with drilling screws in trapezoidal sheets, parallel to raised crests |
| Requirements |
|
| Inclination angle | 10° |
| Material |
|
Side views
K2 S-Dome small System
Downloads
K2 S-Dome small System
Videos
Webinar (DE 14.04.2020)
Erdung, Potentialausgleich und Blitzschutz für Photovoltaik-Anlagen einfach erklärt
K2 S-Dome small System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.