Roof Tiles
SingleRail 36
Product number:
2004258
MCS Certified Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 3.65 m. Material: Aluminium EN AW-6063 T66
SingleRail 36; 4.80 m, black anodised
Product number:
2004396
Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.
SolidRail UltraLight
Product number:
2004264
MCS Certified Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Material: aluminium EN AW-6063 T66
SolidRail Light
Product number:
2004269
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 3.65 m. Material: aluminium EN AW-6063 T66
SingleRail 50; 3.65 m
Product number:
2003606
Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 3.65 m. Material: Aluminium EN AW-6063 T66
SolidRail Light; 4.80 m, black anodised
Product number:
2004397
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 4.80 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.
SolidRail Medium; 4.80 m
Product number:
2004415
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66
SolidRail Alpin; 5.95 m
Product number:
2004275
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. For high span width. Length 5.95 m. Material: aluminium EN AW-6063 T66
Roof Hook SingleHook 3S Light
Product number:
2004795
MCS Certified Roof hook with triple height adjustment in the base plate (40/47/55 mm). For rafters from 48 mm (narrow rafters from 36 mm possible with M6 wood construction screw). 6 mm bracket thickness, ideal for concrete roof tiles. With pre-assembled Climber 36/50 and cylinder head screw. For fastening the K2 SingleRail and CrossRail mounting rail. Material: Aluminium EN AW-6063 T66; stainless steel A2.
SolidHook Pan Tile H38/124 35x6
Product number:
1000096
Z-shaped roof hook for attaching K2 system components to roofs with pantile tiles. Structural component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut.
Base plate: 180x80x4 mm, height under bracket: 38 mm, bracket height: 69 mm, total height: 124 mm, bracket depth: 91 mm. Material: stainless steel (1.4016)
Roof Hook Vario 1
Product number:
1000125
MCS Certified Single height-adjustable Z-shaped roof hook for attaching K2 system components to roofs with pantile tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Dimensions: Base plate: 150x60x5 mm, height under bracket: 43 mm, bracket height: 55-90 mm, bracket: 30x6 mm, total height: approx. 112-145 mm. Material: stainless steel (1.4016)
Roof Hook SingleHook 3S Long
Product number:
2004222
Roof fastener with 3x vertically adjustable base plate (40,47,54 mm) and long bracket. For rafters from 48 mm (narrow rafters from 36 mm possible with M6 wood construction screw). With pre-assembled K2 Climber 36/50 and allen bolt. Used for fixation on the K2 mounting rail type K2 SingleRail and CrossRail. Material: Aluminium EN AW-6063 T66; Stainless steel A2
Roof Hook SolidHook 3S+
Product number:
2002390
Roof hooks with 3 height adjustments in the base plate (40/47/54 mm) and slotted hole in the bracket for vertical SolidRail mounting. Base plate: 124x100, Height under Bracket: 40/47/54 mm, bracket: 35x9 mm, Overall height: 123/130/137 mm. Material: Aluminium EN AW-6063 T66
Roof Hook Vario 2 Narrow Rafters
Product number:
2004244
MCS Certified Adjustable Roof Fastener SolidHook Vario 2 for Pan Tile. For fastening of K2 System parts on roofs with pan tiles. Bracket with elongated hole to fix the SolidRail with T-Bolt and nut M10. Dimension: Base plate: 140x55x5 mm, Height under bracket: 41-50 mm, Bracket height: 57-76 mm, Total height: 120-148 mm. Material: Stainless steel (1.4016) The in line borehole pattern with slotted boreholes in the base plate makes this variant suitable for narrow rafters.
Roof Hook SingleHook 4S
Product number:
2003144
MCS Certified Roof fastener with 3x vertically adjustable base plate (40,47,54 mm) and 30 mm adjustment on the bracket. Total hight adjustment: 120.5 mm - 165.1 mm. For rafters from 48 mm (narrow rafters from 36 mm possible with M6 wood construction screw). With pre-assembled K2 Climber 36/50 and allen bolt. Used for fixation on the K2 mounting rail type K2 SingleRail and CrossRail. Material: Aluminium EN AW-6063 T66; Stainless steel A2
Roof Hook SolidHook 4S+
Product number:
2002402
Roof hook with 3 height adjustments in the base plate (40/47/54 mm) and 30 mm adjustment on the bracket. Slotted hole in the bracket for vertical SolidRail mounting. Base plate: 124x100 mm, Height under bracket: 40/47/54 mm, bracket: 35x9 mm, Overall height: 120.5 - 165 mm. Material: Aluminium EN AW-6063 T66
Roof Hook for Pan Tile H47/134 30x6
Product number:
1000001
Z-shaped roof hook for attaching K2 system components to roofs with pantile tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and collar nut M10.
Base plate: 150x60x5 mm, bracket: 30x6 mm, height under bracket 47 mm (suitable for roof battens with a height of 30 mm) Total height: approx. 133 mm. Material: stainless steel (1.4016)
Roof Hook SingleHook Vario
Product number:
2002651
Dual, height-adjustable Roof Fastener to fasten K2 system components to tile roofs. Bracket with slotted hole for mounting and adjusting the height of the SingleRail. For various battens by means height of bracket infinitely adjustable on baseplate to suit. Including T-Bolt and Locking nut for SingleRail assembly. Material: Stainless steel
Roof Hook SingleHook 3S
Product number:
2003215
MCS Certified Roof fastener with 3x vertically adjustable base plate (40,47,54 mm) for rafters from 48 mm (narrow rafters from 36 mm possible with M6 wood construction screw). With pre-assembled K2 Climber 36/50 and allen bolt. Used for fixation on the K2 mounting rail type K2 SingleRail and CrossRail. Material: Aluminium EN AW-6063 T66; Stainless steel A2
Roof Hook SingleHook Alpin
Product number:
2003155
To fasten K2 system components to tile roofs. Slotted bore hole bracket for installation and height adjustability of the SingleRail. Including T-Bolt and Locking nut for SingleRail assembly. Only to be used in combination with a sheet metal roof tile. Material: Aluminium EN AW-6063 T66
Roof Hook SingleHook 2
Product number:
2003175
Z-shaped stainless steel roof hook for attaching K2 system components exclusively to tiled roofs with flat concrete roof tiles that meet the requirements of BS EN 490. Construction component with fastening elements. With pre-assembled Climber 36/50 and cylinder head screw for K2 SingleRail installation. Material: stainless steel (1.4301)
Roof Hook for Slate Tile
Product number:
1000373
MCS Certified For fastening of K2 System parts on slate roofs. Bracket with elongated hole to fix the SolidRail with T-Bolt M10. Bracket: 40x250x6 mm, Total height: 72 mm. Material: stainless steel A2 (1.4301)
Roof Hook SingleHook 2G
Product number:
2000636
Special roof hook version for metal-tile-roof plate with 3 height adjustments in the base plate and 30mm adjustability in the bracket. Usable without roof holes. Material: aluminium EN AW-6063 T66
Roof Hook Bracket SingleHook 1.1
Product number:
2003152
Bracket of the SingleHook 1.1 roof hook incl. screws and nuts. To be used with the K2 SingleBoard (2002935). Material: Aluminium EN AW-6063 T66 and stainless steel A2
SingleHook FlatTile sheet metal
Product number:
2004282
MCS Certified To ensure proper waterproofing of the SingleHook FLA (2004281) roof hook designed for use with clay brick roofs with flat tile roofing, the use of our metal covers with aluminium 3.0205 (EN-AW-1200) butyl strips is required. Two metal covers measuring 300mm x 260mm are required per roof hook to ensure adequate watertightness. Colour: Red.
SolidHook FLA H35/103 150x2
Product number:
1000074
2mm thin A2 stainless steel roof hook, not MCS-certified. Height under bracket is non-adjustable at 35 mm, use packings (e.g. from plywood) between rafter & hoof if required, headlap up to 230 mm. Designed for flat tiles without requirement to notch out tiles. However, due to thin bracket, this hook has a low load capacity and K2 strongly recommends a SolidHook FLA on every rafter and adding a short strip of EPDM (item no. 1000105) to the underside of the 150mm wide bracket to avoid directly touching tiles under load.
SingleHook FlatTile
Product number:
2004416
MCS Certified The K2 SingleHook FlatTile is perfect for fastening the K2 system components on flat tile roofs. The roof hook has a slotted hole for SingleRail mounting. The K2 SingleRail mounting rail can be fixed to the SingleHook FlatTile with a T-bolt M8x20 (1002387) and a flanged nut M8 (2002744). Two metal roof plates (2004282 or 2004440) are required for each roof hook. With a total height of approx. 144 mm and an bracket of 75x4 mm, this roof hook is a perfect solution to securely and efficiently fasten the K2 system components. The roof hook is made of Magnelis 1.0242 (S250GD+ZM310), so you also get a durable and high-quality fastening.
Roof Hook for Flat Tile
Product number:
1000214
MCS Certified Z-shaped stainless steel roof hook for fastening of K2 System parts on clay brick roofs with flat tile roofing. Structural component with fastening elements. Bracket with elongated hole to fix the SolidRail with T-Bolt and Nut M10. Base plate: 40x50 mm, Height under bracket: 33 mm, Bracket height: 62 mm, Total height: 122 mm, Bracket depth: 189 mm. Material: Stainless steel A2 (1.4301)
Rail connector Set SingleRail 36
Product number:
2001976
MCS Certified Rail connector set as connecting element between two K2 SingleRails 36. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2
Rail connector Set SolidRail UltraLight and Light
Product number:
1004107
MCS Certified For quick and easy connection of two K2 SolidRail XS, UltraLight or Light. Set including screws and nuts.
Rail connector Set SolidRail Medium and Alpin
Product number:
1004109
For quick and easy connection of two K2 SolidRail Medium or Alpin. Set including screws and nuts. Material: Aluminium EN AW-6063 T66 / Stainless steel A2
K2 Clamp MC 25-40
Product number:
2004537
MCS Certified
K2 Clamp - Universal clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW 6063 T66, Thermoplastic, stainless steel A2
K2 Clamp MC 25-40, Black anodised
Product number:
2004540
MCS Certified Black anodized Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, thermoplastic, stainless steel A2. Anodising may show slight signs of scratching due to packaging and transport.
K2 Clamp EC 25-40, black anodised
Product number:
2004545
MCS Certified Black anodized Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, stainless steel, Thermoplastic. Anodising may show slight signs of scratching due to packaging and transport.
K2 Clamp EC 25-40
Product number:
2004543
MCS Certified
Universal module end clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, Stainless steel, Thermoplastic.
BlackCover SingleRail 36
Product number:
2003523
K2 BlackCover for black covering of the rail ends of the K2 SingleRail 36 and K2 SingleRail 36 light. Length of the cover: 150 mm.
Wood screw countersunk head 6x70/42
Product number:
1006398
Head timber screws, drilling-point and Countersunk head 6x70/42. Drive size: TX25. Material: A2
Self-drilling wood screw Ø 6,0 mm
Product number:
2004106
MCS Certified Flange head wood screw 6x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-25), Thread: Full thread.
Material: stainless steel A2
Self-drilling wood screw Ø 8,0 mm
Product number:
2004111
MCS Certified Plate head wood construction screw 8x80 with ETA certification that ensures fast and secure installation without pre-drilling. Drive: T-Drive (T-40), material: A2 stainless steel. Manufacturer: HECO, Reisser or E.u.r.o. Tec.
T-Bolt 28/15 M10
Product number:
1000571
T-Bolt M10x25 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M10x25. Material: stainlesteel A2 (1.4301)
T-Bolt 28/15 M8
Product number:
1000368
T-Bolt M10x30 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M10x25. Material: stainlesteel A2 (1.4301)
Self-locking hexagon nut serration M8
Product number:
2002744
Nut with serration flange and plastomer-inlay for save locking according, DIN 6926. Material: Stainless steel A2
Hexagon Flange nut with serration M8
Product number:
1000043
Hexagon flange nuts with serration M8; DIN 6923 A2 M8. The Serration prevents accidental release. Material: A2 stainless steel; Drive size:A/F 13
Hexagon Flange nut with serration M10
Product number:
1000042
Hexagon flange nuts with serration M10; DIN 6923 A2 M 10. The Serration prevents accidental release. Material: A2 stainless steel; Drive size:A/F 15.
Solar Cable Manager
Product number:
2002870
Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm
External cable clip OMEGA D for solar cables
Product number:
1005394
External cable clip of solar cables for cables extending beyond K2 rails. Fixation in the C-chamber of the Profilee. Material: Polypropylen with UV stabiliser, black
Roof Tiles
K2 mounting systems for tile roofing offer solutions for nearly every roof tile type. The majority of applications can be covered with the three roof hooks SingleHook 1.1, SingleHook 3S and 4S. Our range of roof hooks offers solutions for pantiles, plain tiles, mission tiles, slate roofing, concrete tiles and regional specialities like Coppo.
Roof Tiles
Roof Tiles
Roof Tiles
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.