Bituminous Roof Coverings
BasicRail 22
Product number:
2004277
MCS Certified
Quick mounting rail with static confirmation in K2 Base. For mounting with SpeedClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 3.65 m. Material: Aluminium EN AW-6063 T66
D-Dome 6.15 Base Set
Product number:
2004500
Pre-assembled base rail set for the D-Dome 6.15 system for module widths of 960-1170 mm. Including BasicRail 2.48 m, 2 x Dome 6.15 SD, 2 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel
D-Dome 6.10 Base Set
Product number:
2003620
Pre-assembled basic rail set for the D-Dome 6.10 system for module widths of 960-1170 mm. Including BasicRail 2.48 m, 2 x Dome 6.10 SD, 2 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel
S-Dome 6.10 Base Set
Product number:
2003621
Pre-assembled base rail set for the S-Dome 6.10 system for module widths of 960-1170 mm. Including BasicRail 1.50 m, 1 x Dome 6.10 SD, 1 x Dome 6 EndPlate and 2 x Dome Mat S. Material: aluminium, EPDM, stainless steel
D-Dome 6.10 Base Set LS
Product number:
2004714
Pre-assembled base rail set for the D-Dome 6.10 LS system for module widths of 1134 mm. Including BasicRail 2.65 m, Dome 6.10 SD LS, Dome 6.10 MidPlate LS and Dome Mat S 380. Material: aluminium EN AW 6063 T66, EPDM Shore A 70, stainless steel
DomeClamp EndClamp Set 30-50
Product number:
2004561
Module end clamp set for attaching solar modules to the K2 Dome System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, stainless steel (1.4301).All DomeClamp assembly instructions
DomeClamp EC Black Set 30-50
Product number:
2004564
Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
Dome Mat S 380
Product number:
2003126
Mat S Support Pad. Flexible function to absorb tolerances and protect the roof cover. Suitable for K2
BasicRail. Material: EPDM
Dome 6 Xpress Connector
Product number:
2004819
Dome 6 Xpress Connector for connecting two K2 Dome 6 Base Sets. Length 190 mm, pre-assembled with spring plate and blind rivets.
Dome 6 Xpress Connector Long
Product number:
2005221
Dome 6 Xpress Connector Long for connecting two K2 Dome 6 Base Sets. Length 390 mm, pre-assembled with spring plate and blind rivets.
Dome 6 Connector Set
Product number:
2004178
Alternative article: 2005221Rail connector set as connecting element between two K2 Dome 6.10 Base Set. Length: 495 mm. Including accessories and equipotential bonding. Material: Aluminium, stainless steel
Dome FlatConnector Set
Product number:
1006039
Rail connector set for use as a connecting element between two K2 BasicRail 22 and BasicRail 36 rails. Also used to connect the SingleRail 36 light in the Dome-6 LS systems. Includes screws and MK2. Material: Aluminium EN AW 5754 H111, stainless steel A2
Dome 6.10 Peak LS
Product number:
2004711
Peak for elevating the modules for the Dome 6.10 Base Set LS. The peak is clicked into the pre-assembled MidPlate LS. Material: Aluminium EN AW-6063 T66
Dome 6.15 Peak
Product number:
2004174
Component for the module elevation of the Dome 6.15 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the BasicRail with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66
Dome Zero Peak
Product number:
2003123
Component for the roof-parallel module elevation of the Dome Zero system. The peak is fixed to the
BasicRail
with a socket head screw and MK2. Material: Aluminium EN AW-6063 T66
Dome 6.10 SD
Product number:
2003243
Front module support element for the Dome 6.10 system. Material: aluminium
Dome 6.10 Peak
Product number:
2004125
Component for the module elevation of the Dome 6.10 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the
BasicRail
with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66
Dome 6.15 SD
Product number:
2004175
Front module support element for the Dome 6.15 system. Material: aluminium
K2 TerraGrif K2MI Duo 18
Product number:
2003542
Mounting accessories for DomeClamp Moduleclamp establishing equipotential bonding of the K2 Dome 6 mounting system or for earthing the module frames.
DomeClamp Middle Clamp 30-50 mm
Product number:
2002558
Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
S-Dome 6.10 Windbreaker LS
Product number:
2004167
K2 Windbreaker to deflect wind on the backs of the K2 S-Dome 6.10 Classic LS system. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)
S-Dome 6.15 Windbreaker
Product number:
2004180
K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.15 System. Suitable for module lengths 1799 mm - 2150 mm. Material: Steel with Magnelis ZM310 coating
S-Dome 6.15 Windbreaker LS
Product number:
2004183
K2 Windbreaker to deflect wind on the backs of the K2 S-Dome 6.15 Classic LS system. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)
S-Dome 6.10 Windbreaker
Product number:
2004103
K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System. Suitable for module dimensions from 2045 mm - 2398 mm. Material: Steel with Magnelis ZM310 coating
Dome Porter X-tra long Alu
Product number:
2004098
For quick and universal mounting of different ballasting for K2 Dome 6 systems. Dimensions: 2450x40x60 mm. Maximum permissible ballast: 148 kg (distributed over 2 mounted dome porters). Suitable for module lengths 1998-2405 mm. Material: Aluminium EN AW 6063 T66
Dome Porter Flex
Product number:
2005285
For the quick and universal mounting of various ballast weights beneath the modules – for the K2 Dome Zero System, K2 Dome 6.07 Classic Portrait and K2 Dome 6 LS System. Suitable for module widths up to 1320 mm – for the Dome Zero & Dome 6.07 Classic Portrait systems – and for module lengths of 1562–2390 mm for the Dome 6 Classic LS and Xpress LS systems with 1/4 clamping. Please check the correct position of the module’s clamping points on site. Fasten using 2x MK2 and an M8x20 screw each. Maximum permissible load: 178 kg (distributed across 2 mounted Dome Porters). Dimensions: 1377x40x40 mm. Material: Galvanised steel 1.0529 (S350+ZM310).
Dome SpeedPorter
Product number:
2002300
For ballast mounting for the K2 Dome 6 Classic flat roof system. Place two SpeedPorters at a distance from each other, depending on the size of the bricks, on the
BasicRail and place ballast (up to approx. 40 kg) on them. Material: aluminium
Dome Porter Flex Alu
Product number:
2004157
Alternative article: 2005285For quick and universal mounting of different ballast systems for the K2 Dome Zero System and K2 Dome 6 LS System. Dimensions: 1365x40x40 mm. Maximum permissible ballast: 178 kg (distributed over 2 mounted Dome Porters). The Porter can be used with the Dome Zero System for module widths of up to 1320 mm and with the Dome 6 Classic LS System for module lengths of 1562-2390 mm. Please check the correct position of the module clamping points on site. Material: Aluminium EN AW 6063 T66
MK2 insertion nut with clip, Stainless steel
Product number:
1001643
The Fast-installation MK2 insertion nut can be put into the K2 rail everywhere. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: stainless steel 1.4301, TPC.
Hexagonal socket head cap screw M8x20
Product number:
2001729
Hexagon socket head cap screw M8x20 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2
Alpha PV-Clip
Product number:
2005041
External cable clip for solar cables for cable routing on the solar module. Fastened to the module frame.
K2 OptiClip
Product number:
2005062
The K2 OptiClip allows you to quickly and securely attach all standard micro-inverters and optimisers to all K2 rails with MK2 channels – without any screws on the roof. No tools required thanks to the smart click function for clean, quick and flexible installation.
Solar Cable Manager
Product number:
2002870
Alternative article: 2005041Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm
Cable routing Performa Mesh Tray 70x100x3000
Product number:
2004054
Performa mesh tray for cable management on the flat roof in combination with the PVX Singlemount or on trapezoidal sheet metal in combination withe the PVX Minimount.
Dimensions (LxWxH): 3000 x 100 x 75 mm. Wire diameter: 3,9 mm.
Material: steel (zinc+)
Performa Mesh Tray Connector
Product number:
2004055
Performa mesh tray connector for article 2004054. Two connectors are required per mesh tray. Dimensions (LxWxH): 86 x 30 x 10 mm. Material: spring steel (zinc)
Dome FixPro S
Product number:
2003384
Fixing accessories for attaching the K2 Dome 6 LS-systems and K2 Dome Zero to a mounting base for roofs ≥ 3°. Depending on the mounting base, a Climber M10 or M12 and an adapter plate are required separately. Suitable for module lengths: Classic LS 1562 - 2390 mm, Xpress LS 1562 - 2500 mm, Dome Zero 1640 - 2390 mm. Material: aluminium, stainless steel, TPC.
Please check the correct position of the module's clamping points on site.
Dome FixPro L
Product number:
2004144
Fixing accessories for attaching the K2 Dome 6 (Classic and Xpress system) to a mounting base for roofs ≥ 3°. Depending on the mounting base, a Climber M10 or M12 and an adapter plate are required separately. Suitable for module lengths: 1448 - 2390 mm. Material: aluminium, stainless steel, PA
Climber 36/50 for roof fixture
Product number:
2003147
K2 Climber with slotted hole for fixing the K2 SingleRail or CrossRail mounting rail to the M12 hanger bolt/M12 roof anchor or as a connecting element between the flat roof mounting foot and the Dome FixPro. Material: Aluminium EN AW-6063 T66
Adapter plate M10 for roof fixture
Product number:
2002546
Adapter plate for M10 hanger bolts and roof anchors M10 in combination with the Climber M10 or as accessory part for the article Dome FixPro. Dimensions: 50x90. Material: aluminium
Dome Speed Spacer Large
Product number:
2004129
Distance tool for the K2 Dome system. Length: 2,50 m. Material: Aluminium, Acromide
Test weight for measuring the coefficient of friction
Product number:
2002620
Test weight for measuring the coefficient of friction on a roof.
PE Baseplate
Product number:
1001572
K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 600x800 mm. Material: Polyethylene. Colour of the product may differ from the picture.
StairPlate Set
Product number:
2004057
The K2 StairPlate is the perfect solution for installing Micro Inverters and Optimizers from manufacturers such as SolarEdge, Huawei, BRC Solar and Enphase. With the StairPlate, these devices can be easily hooked into almost all K2 mounting rails without having to screw them directly to the roof. The units are attached to the K2 StairPlate in advance with the appropriate screws and nuts. Please note the height of the modules and the units to be used. Can only be used to a limited extent when using AddOn. Material: Stainless steel
TerraGrif QL
Product number:
2004231
Mounting accessories for establishing equipotential bonding of the K2 mounting systems or for earthing the module frames. Compatible moduleclamp: K2 Clamp 25-40.
Lightning protection clamp 8mm Set
Product number:
2004922
Lightning protection clamp for clamping lightning protection cables with a diameter of 8 mm. Includes MK2 insert nut with mounting clip and M8x25 pan head screw.
DomeClamp Middle Clamp 30-50 mm, black anodized
Product number:
2002609
alternative article: 2004558Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System.
DomeClamp End Clamp 30-50 mm, black anodized
Product number:
2002610
Alternative article: 2004564Black anodized universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.
Bituminous Roof Coverings
The K2 systems can be installed on bitumen roofing easily, quickly and without damaging the bitumen - only ballast is required.
The mounting systems at a glance:
Bituminous Roof Coverings
Bituminous Roof Coverings
Bituminous Roof Coverings
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.