D-Dome 6.10 Base Set

Product number: 2003246_C

Pre-assembled basic rail set for the D-Dome 6.10 system for module widths of 960-1170 mm. Including BasicRail 2.48 m, 2 x Dome 6.10 SD, 2 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel

BasicRail 22

Product number: 2004278

Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 4.80 m. Material: Aluminium EN AW-6063 T66

BasicRail 22

Product number: 2004279

Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 5.95 m. Material: Aluminium EN AW-6063 T66

S-Dome 6.10 Base Set

Product number: 2003247_C

print.noImage

Pre-assembled basic rail set for the S-Dome 6.10 system. Includes SpeedRail 1.45 m, Dome SD, EndPlate and Mat S. Material: Aluminium, EPDM, stainless steel

BasicRail 36; 4.80 m

Product number: 2005242

New

Quick-mounting rail for use with Dome 6.07.

S-Dome 6.10 Base Set L

Product number: 2004096

DISCONTINUED

Alternative article: 2003621

Pre-assembled basic rail set for the S-Dome 6.10 system for module widths of 1061-1170 mm. Includes BasicRail 1.50 m, 1 x Dome 6.10 SD, 1 x Dome 6 EndPlate, 2 x Dome Mat S. Material: Aluminium, EPDM, stainless steel

D-Dome 6.10 Base Set L

Product number: 2004095

DISCONTINUED

Alternative article: 2003620

Pre-assembled basic rail set for the D-Dome 6.10 system for module widths of 1061-1170 mm. Includes BasicRail 2.48 m, 2 x Dome 6.10 SD, 1 x Dome 6 MidPlate, 3 x Dome Mat S. Material: Aluminium, EPDM, stainless steel

BasicRail 22

Product number: 2004276_C

Schnellmontageschiene mit statischem Nachweis in K2 Base. Für die Montage mit BasicClip auf einem Trapezblechdach oder als Basisschiene für das K2 Dome System. Material: Aluminium EN AW-6063 T66

D-Dome 6.10 Base Set LS

Product number: 2004714

Pre-assembled base rail set for the D-Dome 6.10 LS system for module widths of 1134 mm. Including BasicRail 2.65 m, Dome 6.10 SD LS, Dome 6.10 MidPlate LS and Dome Mat S 380. Material: aluminium EN AW 6063 T66, EPDM Shore A 70, stainless steel

S-Dome 6.15 Base Set

Product number: 2004501

Pre-assembled base rail set for the S-Dome 6.15 system for module widths of 960-1170 mm. Including BasicRail 1.82 m, 1 x Dome 6.15 SD, 1 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel

BasicRail 22

Product number: 2004277

Quick mounting rail with static confirmation in K2 Base. For mounting with SpeedClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 3.65 m. Material: Aluminium EN AW-6063 T66

D-Dome 6.15 Base Set

Product number: 2004500

Pre-assembled base rail set for the D-Dome 6.15 system for module widths of 960-1170 mm. Including BasicRail 2.48 m, 2 x Dome 6.15 SD, 2 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel

BasicRail 22

Product number: 2003460

New

Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 2.40 m. Material: Aluminium EN AW-6063 T66

D-Dome 6.10 Base Set

Product number: 2003620

Pre-assembled basic rail set for the D-Dome 6.10 system for module widths of 960-1170 mm. Including BasicRail 2.48 m, 2 x Dome 6.10 SD, 2 x Dome 6 EndPlate, 3 x Dome Mat S. Material: aluminium, EPDM, stainless steel

S-Dome 6.10 Base Set

Product number: 2003621

Pre-assembled base rail set for the S-Dome 6.10 system for module widths of 960-1170 mm. Including BasicRail 1.50 m, 1 x Dome 6.10 SD, 1 x Dome 6 EndPlate and 2 x Dome Mat S. Material: aluminium, EPDM, stainless steel

K2 Buddy - Dome accessories Set

Product number: 2003603

The Dome Accessories Set offers all the necessary accessories and small parts to safely install the TopBox Set Snow in the K2 Dome flat roof systems. Among other things, it includes an aluminum plate that supports the snow sensor units and securely connects the BasicRails. In addition, it contains specific module stops for precise measurement data acquisition as well as lift-off protection and cable managers to ensure a reliable installation. To install the K2 Buddy in combination with the Dome 6 system, the following additional sets are required:

1000003 K2 Buddy - TopBox Set Snow
1000097 K2 Buddy - BaseBox Set
2003448 K2 Buddy - Dome Profile Set

K2 Buddy - Dome Profile Set 31-35 mm

Product number: 2003448

Mounting rail set for K2 Buddy mounting. This set contains two BasicRail rails with a length of 1.30 m and two square profiles, also 1.30 m long for module frame height 31-35 mm. The two additional BasicRail mounting rails are essential for mounting the K2 Buddy. The square profiles are designed to stabilize and reinforce the frame construction.

K2 Buddy - Dome Profile Set 28-30 mm

Product number: 2004547

Mounting rail set for K2 Buddy installation. This set contains two BasicRail rails with a length of 1.30 m as well as a stiffening profile for mounting on the module frame with a length of 1.30 m for module frame height 28-30 mm. The two additional BasicRail mounting rails are essential for mounting the K2 Buddy. The stiffening profile is designed to stabilise and reinforce the frame construction.

DomeClamp EC Black Set 30-50

Product number: 2004564

New

Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)

DomeClamp EndClamp Set 30-50

Product number: 2004561

New

Module end clamp set for attaching solar modules to the K2 Dome System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, stainless steel (1.4301).

All DomeClamp assembly instructions

RidgeConnector Set

Product number: 2004844

New

The K2 RidgeConnector is a ridge connector set that connects two Dome 6 module blocks across a roof ridge. The connection can be made either via the BasicRail support rails of the module groups or with an additional SingleRail as a strut at right angles across the BasicRail support rails. The set thus offers a solution for all conceivable orientations of the module field of your PV project, ensuring optimum use of solar power.

The RidgeConnector is compatible with all Dome 6 variants – D-Dome and S-Dome 6.

You can enquire about the design of module fields with the RidgeConnector directly from us.

Dome Mat S 380

Product number: 2003126

Mat S Support Pad. Flexible function to absorb tolerances and protect the roof cover. Suitable for K2 BasicRail. Material: EPDM

LoadSolver

Product number: 2004782

Turned Mat S in 200mm length and sheet metal adapter. Used to optimise load distribution on flat roofs. Suitable for K2 BasicRail 22. Compatible with K2 Dome 6 systems and K2 Dome Zero systems. Material Aluminium EN AW 5754 H111, EPDM.

Note: Not plannable in base; please use our planning enquiry.

Dome FlatConnector Set

Product number: 1006039

Rail connector set as connecting element between two K2 BasicRail 22. Screws included. Material: Aluminium EN AW 5754 H111, stainless steel A2.

Dome 6 Connector Set

Product number: 2004123_C

print.noImage

Rail connector set as connecting element between two K2 Dome 6 Base Set. Including accessories and equipotential bonding. Material: Aluminium, stainless steel

Dome 6 Connector Set

Product number: 2004178

Rail connector set as connecting element between two K2 Dome 6.10 Base Set. Length: 495 mm. Including accessories and equipotential bonding. Material: Aluminium, stainless steel

Dome 6 Connector Set

Product number: 2004123

Rail connector set as connecting element between two K2 Dome 6 Base Set. Including accessories and equipotential bonding. Material: Aluminium, stainless steel

Dome 6 XPress Connector Set

Product number: 2004819

New

Dome 6 XPress Connector for connecting the K2 BasicRail. Length 190 mm, pre-assembled with a spring plate and blind rivets.

Dome 6.10 Peak LS

Product number: 2004711

Peak for elevating the modules for the Dome 6.10 Base Set LS. The peak is clicked into the pre-assembled MidPlate LS. Material: Aluminium EN AW-6063 T66

Dome 6.07 Peak

Product number: 2005194

New

Upper module support for the Dome 6.07 system. Material: Aluminium EN AW-6063 T66

Dome 6.10 SD

Product number: 2003243

Front module support element for the Dome 6.10 system. Material: aluminium

Dome 6.15 SD

Product number: 2004175

Front module support element for the Dome 6.15 system. Material: aluminium

Dome 6.10 Peak

Product number: 2004125

Component for the module elevation of the Dome 6.10 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the BasicRail with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66

Dome 6.15 Peak

Product number: 2004174

Component for the module elevation of the Dome 6.15 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the BasicRail with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66

K2 TerraGrif K2MI Duo 18

Product number: 2003542

Mounting accessories for DomeClamp Moduleclamp establishing equipotential bonding of the K2 Dome 6 mounting system or for earthing the module frames.

DomeClamp Middle Clamp 30-50 mm

Product number: 2002558

Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)

DomeClamp Middle Clamp 30-50 mm, black anodized

Product number: 2002609

Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.

S-Dome 6.10 Windbreaker

Product number: 2004103

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System. Suitable for module dimensions from 2045 mm - 2398 mm. Material: Steel with Magnelis ZM310 coating

S-Dome 6.15 Windbreaker

Product number: 2004181

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.15 System. Suitable for module dimensions from 2045 mm - 2390 mm. Material: Steel with Magnelis ZM310 coating

S-Dome 6.15 Windbreaker LS

Product number: 2004183

K2 Windbreaker to deflect wind on the backs of the K2 S-Dome 6.15 Classic LS system. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)

S-Dome 6.10 Windbreaker

Product number: 2003250

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System. Material: Steel with Magnelis ZM310 coating

S-Dome 6.10 Windbreaker

Product number: 2003249

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System. Suitable for module lengths 1448 mm - 1799 mm. Material: Steel with Magnelis ZM310 coating

S-Dome 6.15 Windbreaker

Product number: 2004179

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System. Suitable for module lengths 1448 mm - 1799 mm. Material: Steel with Magnelis ZM310 coating

S-Dome 6.15 Windbreaker

Product number: 2004180

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.15 System. Suitable for module lengths 1799 mm - 2150 mm. Material: Steel with Magnelis ZM310 coating

S-Dome 6.15 Windbreaker

Product number: 2004179_C

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.15 System. Material: Steel with Magnelis ZM310 coating

S-Dome 6.10 Windbreaker

Product number: 2003250_C

print.noImage

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System (increase downforce). Material: Steel with Magnelis ZM310 coating

S-Dome 6.10 Windbreaker LS

Product number: 2004167

K2 Windbreaker to deflect wind on the backs of the K2 S-Dome 6.10 Classic LS system. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)

Dome Porter Flex

Product number: 2004157

For quick and universal mounting of different ballast systems for the K2 Dome Zero System and K2 Dome 6 LS System. Dimensions: 1365x40x40 mm. Maximum permissible ballast: 178 kg (distributed over 2 mounted Dome Porters). The Porter can be used with the Dome Zero System for module widths of up to 1320 mm and with the Dome 6 Classic LS System for module lengths of 1562-2390 mm. Please check the correct position of the module clamping points on site. Material: Aluminium EN AW 6063 T66

Dome Porter

Product number: 2003151_C

Ballast tray for a fast and universal bearing of different ballasts slabs. Used for K2 Dome systems. Suitable for module lengths from 1779-2150 mm in combination with the MiniClamp, 1742-2148 mm in combination with the OneMid and 1749-2155 mm in combination with the K2 XS clamp. Material: Aluminium EN AW 6063 T66

Dome Porter short

Product number: 2003150

Ballast tray for a fast and universal bearing of different ballasts slabs. Used for K2 Dome 6 systems. Dimensions: 1844x40x40 mm. Maximum allowable ballast: 108 kg ( divided on 2 mounted Dome Porter.) Suitable for module lengths 1392-1799 mm. Material: aluminium.

Dome Porter X-tra long

Product number: 2004098

For quick and universal mounting of different ballasting for K2 Dome 6 systems. Dimensions: 2450x40x60 mm. Maximum permissible ballast: 148 kg (distributed over 2 mounted dome porters). Suitable for module lengths 1998-2405 mm. Material: Aluminium EN AW 6063 T66

Dome SpeedPorter

Product number: 2002300

For ballast mounting for the K2 Dome 6 Classic flat roof system. Place two SpeedPorters at a distance from each other, depending on the size of the bricks, on the BasicRail and place ballast (up to approx. 40 kg) on them. Material: aluminium

Dome Porter long

Product number: 2003151

For quick and universal mounting of different ballasting for K2 Dome 6 systems. Dimensions: 2195x40x40 mm. Maximum permissible ballast: 108 kg (distributed over 2 mounted dome porters). Suitable for module lengths 1743-2150 mm. Material: Aluminium EN AW 6063 T66

MK2 Slot nut with clip, Aluminum

Product number: 2000034

The Fast-installation M K2 slot nut can be put into the K2 rail everywhere*. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: Aluminium EN AW 6063 T66, Hytrel 8238-TPC.

MK2 insertion nut with clip, Stainless steel

Product number: 1001643

The Fast-installation MK2 insertion nut can be put into the K2 rail everywhere. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: stainless steel 1.4301, TPC.

Hexagonal socket head cap screw M8x20

Product number: 2001729

Hexagon socket head cap screw M8x20 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2

Hexagonal socket head cap screw M8x35

Product number: 2001728

Hexagon socket head cap screw M8x35 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2

Thread-forming metal screw

Product number: 2002937

Thread-tapping screw 6x25 mm for non-cutting processing, approved for sheet thicknesses (steel and aluminium) from 0.5 mm to 1.25 mm.

Multi Monti - fastner 7.5x40/5

Product number: 2002570

Concrete screw anchor MULTI-MONTI-plus MS 7,5x40 with flange head is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. Material: carbon steel bright zinc plated, A2K

Alpha PV-Clip

Product number: 2005041

New

External cable clip for solar cables for cable routing on the solar module. Fastened to the module frame. Material: polypropylene with UV stabiliser, black

K2 OptiClip

Product number: 2005062

New

The K2 OptiClip allows you to quickly and securely attach all standard micro-inverters and optimisers to all K2 rails with MK2 channels – without any screws on the roof. No tools required thanks to the smart click function for clean, quick and flexible installation.

Solar Cable Manager

Product number: 2002870

Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm

PVX Singlemount

Product number: 2004879

New

The PVX Singlemount serves as a support for cable trays (50-300 mm wide) on the flat roof. It offers a flexible, stable and user-friendly solution for your installations. Dimensions: L 168 x W 107 x H 75 mm. Material: PE and ASA. Mesh cable tray not included.

PVX Multistrap+

Product number: 2004880

New

The PVX Multistrap+ serves as a support for cable trays up to 300 m wide - the M8 screw for fastening is included. Furthermore, up to 2 cable conduits with a diameter of 16-31 mm can be fixed - cable ties are included. The Multistrap+ therefore offers a flexible, stable and user-friendly solution for your installations on flat roofs. Dimensions: L 168 x W 107 x H 75 mm. Material: PE and ASA. Cable duct/cable conduits not included.

Cable routing Performa Mesh Tray 70x100x3000

Product number: 2004054

Performa mesh tray for cable management on the flat roof in combination with the PVX Singlemount or on trapezoidal sheet metal in combination withe the PVX Minimount. Dimensions (LxWxH): 3000 x 100 x 75 mm. Wire diameter: 3,9 mm. Material: steel (zinc+)

Performa Mesh Tray Connector

Product number: 2004055

Performa mesh tray connector for article 2004054. Two connectors are required per mesh tray. Dimensions (LxWxH): 86 x 30 x 10 mm. Material: spring steel (zinc)

Dome FixPro L

Product number: 2004144

Fixing accessories for attaching the K2 Dome 6 (Classic and Xpress system) to a mounting base for roofs ≥ 3°. Depending on the mounting base, a Climber M10 or M12 and an adapter plate are required separately. Suitable for module lengths: 1448 - 2390 mm. Material: aluminium, stainless steel, PA

Dome FixPro S

Product number: 2003384

Fixing accessories for attaching the K2 Dome 6 LS-systems and K2 Dome Zero to a mounting base for roofs ≥ 3°. Depending on the mounting base, a Climber M10 or M12 and an adapter plate are required separately. Suitable for module lengths: Classic LS 1562 - 2390 mm, Xpress LS 1562 - 2500 mm, Dome Zero 1640 - 2390 mm. Material: aluminium, stainless steel, TPC.

Please check the correct position of the module's clamping points on site.

Adapter plate M10 for roof fixture

Product number: 2002546

Adapter plate for M10 hanger bolts and roof anchors M10 in combination with the Climber M10 or as accessory part for the article Dome FixPro. Dimensions: 50x90. Material: aluminium

Climber 36/50 for roof fixture

Product number: 2003146_C

K2 Climber with slotted hole for fixing the K2 SingleRail or CrossRail mounting rail to the M10 hanger bolt/M10 roof anchor or as a connecting element between the flat roof mounting foot and the Dome FixPro. Material: Aluminium EN AW-6063 T66

Adapter plate M12 for roof fixture

Product number: 2002547

Adapter plate for M12 hanger bolts and roof anchors M12 in combination with the Climber M12 or as accessory part for the article Dome FixPro. Dimensions: 50x90. Material: aluminium

Climber 36/50 for roof fixture

Product number: 2003147

K2 Climber with slotted hole for fixing the K2 SingleRail or CrossRail mounting rail to the M12 hanger bolt/M12 roof anchor or as a connecting element between the flat roof mounting foot and the Dome FixPro. Material: Aluminium EN AW-6063 T66

Adapter plate for roof fixture

Product number: 2002546_C

Adapter plate for hanger bolts and roof anchors in combination with the Climber or as accessory part for the article Dome FixPro. Dimensions: 50x90.

Climber 36/50 for roof fixture

Product number: 2003146

K2 Climber with slotted hole for fixing the K2 SingleRail or CrossRail mounting rail to the M10 hanger bolt/M10 roof anchor or as a connecting element between the flat roof mounting foot and the Dome FixPro. Material: Aluminium EN AW-6063 T66

Dome Speed Spacer Large

Product number: 2004129

Distance tool for the K2 Dome system. Length: 2,50 m. Material: Aluminium, Acromide

Test weight for measuring the coefficient of friction

Product number: 2002620

Test weight for measuring the coefficient of friction on a roof.

PE Baseplate

Product number: 2004143

K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 800x600 mm. Material: Polyethylene. Colour of the product may differ from the picture.

Self-tapping screw with sealing washer, 6x25

Product number: 1000212

Self-drilling hexagonal sheet metal screw with sealing washer (Ø16 mm) 6.0x25 mm. Approved for sheet steel from 0.5 mm and for aluminium from 0.8 mm. With ETA certification. Material: A2 stainless steel, EPDM

PE Baseplate

Product number: 2003389

DISCONTINUED

K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 800x600 mm. EuCertPlast certified (recycling certificate). Material: Polyethylene. Colour of the product may differ from the picture

PE Baseplate

Product number: 1001572

K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 600x800 mm. Material: Polyethylene. Colour of the product may differ from the picture.

PE Baseplate

Product number: 1001572_C

K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 600x800 mm. Material: Polyethylene

StairPlate Set

Product number: 2004057

The K2 StairPlate is the perfect solution for installing Micro Inverters and Optimizers from manufacturers such as SolarEdge, Huawei, BRC Solar and Enphase. With the StairPlate, these devices can be easily hooked into almost all K2 mounting rails without having to screw them directly to the roof. The units are attached to the K2 StairPlate in advance with the appropriate screws and nuts. Please note the height of the modules and the units to be used. Can only be used to a limited extent when using AddOn. Material: Stainless steel

TerraGrif PL

Product number: 2004102

The TerraGrif PL can be used for potential equalisation of the K2 MiniFive components in the K2 MiniRail MK2 system. It can also be used for potential equalisation in the InsertionRail 2.0. Material: Stainless steel (301 TA)

Lightning protection clamp 8mm Set

Product number: 2004922

New

Lightning protection clamp for clamping lightning protection cables with a diameter of 8 mm. Includes MK2 insert nut with mounting clip and M8x25 pan head screw.

Climber 36/50 Set

Product number: 2003145

A cross connector for the K2 SingleRail 36 & 50 and the K2 CrossRail 36 & 48. Nuts and bolts included. Material: aluminium EN AW-6063 T66, stainless steel A2

Mat S Tool

Product number: 2004141

Mat S Tool for mounting the Mat S on the BasicRail .

SingleRail 36 Light; 4.80 m

Product number: 2004413

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: Aluminium EN AW-6063 T66

SingleRail 36 Light; 4.40 m

Product number: 2003258

DISCONTINUED Phase out item

Alternative item: 2004413

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4,40 m. Material: Aluminium EN AW-6063 T66

Self-tapping screw 4.8x20

Product number: 2003427

Phase out item

Alternative article: 2002937
Thread-tapping screw 4.8x20 mm for S-Dome 6 Windbreaker mounting.

Lightning protection clamp Alu 8mm - Set

Product number: 2002473

Phase out item

Lightning protection clamp Alu 8mm - Set

Alternative article: 2004922

Lightning protection clamp for clamping Ø 8mm lightning protection cables. Including MK2 slot nut, Washer (8,4x20x1,2 mm) and stainless steel socket screw M8x30.

DomeClamp Middle Clamp 30-50 mm, black anodized, with TerraGrif

Product number: 2005037

Phase out item

DomeClamp Middle Clamp 30-50 mm, black anodized, with TerraGrif

Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System incl. TerraGrif K2MI Duo. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)

DomeClamp End Clamp 30-50 mm, black anodized

Product number: 2002610

Phase out item

DomeClamp End Clamp 30-50 mm, black anodized

Alternative article: 2004564

Black anodized universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.

K2 Hand sample D-Dome 6.10

Product number: 2004035

Exhibit of the K2 D-Dome 6.10 System

K2 Hand sample S-Dome 6.10

Product number: 2004036

Exhibition piece of the K2 S-Dome 6.10 System