NEW - MiniRail MK2 System
Short rail for mounting solar modules on trapezoidal sheet metal roofs, incl. 4 thread-forming tapping screw with sealing washer. Material: Aluminium EN AW-6063 T66, EPDM, Stainless Steel A2
Set of two hexagon socket screws and two MK2 that fix MiniFive to MiniRail. Material: Stainless steel
Additional adapter as module support for the MiniRail MK2 System with an inclination of 5° for improved rear ventilation. Width: 9 cm. Material: aluminium EN AW-6063 T66
Additional adapter as module support for the MiniRail MK2 System with an inclination of 5° for improved rear ventilation. Width: 9 cm. Material: aluminium EN AW-6063 T66
Universal module end clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.
Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.
Universal module middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM
Universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM
Black anodized universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Black anodized universal middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Anodized aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Black anodized module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA. Eloxal may show slight scratches as a result of packaging and transport.
Black anodized module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA.
Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm
The UV-resistant PVX Multimount provides a multifunctional cable management system for mesh tray on trapezoidal roofs. Compatible mesh tray: 2004054. Material: Nylon PA6GF30, Halogen free, UV resistant
Micro Inverter and Optimizer of the companies Solar Edge and Enphase can be hooked in all K2 rails (except MiniRail) with K2 StairPlate without screwing it directly on the roof. With the corresponding screws and nuts the tools can be connected with the K2 StairPlate in advance. The height of the modules and the tools to be used must be noted. Material: stainless-steel 1.4301
Optional addition for the K2 SpeedRail and MultiRail system. The RailUp Set allows the modules to be raised using a minimum of material and to optimise module ventilation on the trapezoidal sheet metal roofs. Furthermore the installation of power optimizers and microinverters becomes easier. The set includes all screws and nuts necessary for the installation. The RailUp set is mounted under each module clamp and is compatible with the universal K2 clamps OneMid/OneEnd as well as the K2 standard module clamps. It is not compatible with the K2 AddOn. Material: aluminium, stainless steel and TPC
Mounting accessories for establishing equipotential bonding of the K2 mounting systems or for earthing the module frames. Incompatible systems: SpeedRail (landscape mounting). Material: stainless steel 301 TA
Two Lightning protection clamp for clamping Ø 8mm lightning protection cables for universal use as a T, cross, parallel and impact clamp. Including allen bolt M8x40, 2x Washer 8,4 x 20 x 1,2 mm and Locking nuts M8.
Lightning protection clamp for clamping Ø 8mm lightning protection cables. Including MK2 slot nut, Washer (8,4x20x1,2 mm) and stainless steel socket screw M8x30.
Exhibit of the K2 MiniRail System. Consisting of the MiniRail MK2 rail, MiniFive MK2 Front & End and one module clamp set each.
Exhibit of the K2 MiniRail system. Consisting of the MiniRail MK2 rail and one module clamp set each.
NEW - MiniRail MK2 System
MiniRail with MK2 rail channel - High flexibility and a wide range of applications on the roof are created. The new MK2 rail channel eliminates the need for a separate, dedicated module clamp and improves the connection of the optimisers and the elevation with RailUp.
- Innovative and statically optimised short rail system that is quick and easy to mount
- Universal module clamps and suitable for portrait and landscape orientation
- High planning reliability, optimised for storage and transport
- 5° elevation with MiniFive: significantly more output thanks to improved ventilation and optimised solar irradiation
NEW - MiniRail MK2 System
System variant
Significantly more yield through...
- Improved rear ventilation
- Optimized irradiation angles
- Superior module performance
Available soon.
NEW - MiniRail MK2 System
Technical data
| MiniRail MK2 System | |
|---|---|
| SCOPE OF APPLICATION | Pitched roofs with trapezoidal sheet metal or sandwich panels Roof inclination: 5 - 75° |
| FASTENING TYPE / ROOF FIXTURE | Screws in roofing with self-tapping thin sheet screws |
| REQUIREMENTS |
|
| MODULE ORIENTATION | Vertical or horizontal |
| DIMENSIONS MINIRAIL W × H × L [MM] | 85,4 × 31,4 × 385 |
| ELEVATION WITH MINIFIVE | approx. 5° |
* The project-specific minimum high crest width dimension can be found in the Base report.
Dimensioning scheme MiniRail
W = width / H = height / L = length
NEW - MiniRail MK2 System
Downloads
NEW - MiniRail MK2 System
Videos
NEW - MiniRail MK2 System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.