EndCap for Solidrail UltraLight

Product number: 2004796

New

K2 EndCap for SolidRail UltraLight

SolidHook FLA H35/103 150x2

Product number: 1000074

2mm thin A2 stainless steel roof hook, not MCS-certified. Height under bracket is non-adjustable at 35 mm, use packings (e.g. from plywood) between rafter & hoof if required, headlap up to 230 mm. Designed for flat tiles without requirement to notch out tiles. However, due to thin bracket, this hook has a low load capacity and K2 strongly recommends a SolidHook FLA on every rafter and adding a short strip of EPDM (item no. 1000105) to the underside of the 150mm wide bracket to avoid directly touching tiles under load.

SingleRail 36

Product number: 2003458

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 2.40 m. Material: Aluminium EN AW-6063 T66

SingleRail 36

Product number: 2004260

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 5.95 m. Material: Aluminium EN AW-6063 T66

SingleRail 36

Product number: 2004257

DISCONTINUED

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 2.50 m. Material: Aluminium EN AW-6063 T66

SingleRail 36

Product number: 2004393

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4,80 m. Material: Aluminium EN AW-6063 T66

SingleRail 36

Product number: 2004257_C

Montageschiene mit seitlicher Anbindung und statischem Nachweis in K2 Base. Variabel einsetzbar für verschiedene Dachanbindungen. Material: Aluminium EN AW-6063 T66

SingleRail 36

Product number: 2004258

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 3.65 m. Material: Aluminium EN AW-6063 T66

SolidRail UltraLight

Product number: 2003462

New

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 2.40 m. Material: aluminium EN AW-6063 T66

SolidRail UltraLight

Product number: 2004263_C

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Material: aluminium EN AW-6063 T66

SingleRail 36; 4.80 m, black anodised

Product number: 2004396

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.

SolidRail UltraLight

Product number: 2004266

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 5.95 m. Material: aluminium EN AW-6063 T66

SolidRail UltraLight

Product number: 2004264

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 3.65 m. Material: aluminium EN AW-6063 T66

SolidRail UltraLight

Product number: 2004394

New

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66

SolidRail UltraLight

Product number: 2004263

Phase out item

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 2.50 m. Material: aluminium EN AW-6063 T66

SolidRail Light

Product number: 2003461

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 2.40 m. Material: aluminium EN AW-6063 T66

SolidRail Light

Product number: 2004268

DISCONTINUED

Alternative article: 2003461

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 2.50 m. Material: aluminium EN AW-6063 T66

SolidRail Light

Product number: 2004269

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 3.65 m. Material: aluminium EN AW-6063 T66

SolidRail Light

Product number: 2004395

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 4.80 m. Material: aluminium EN AW-6063 T66

SolidRail Light

Product number: 2004268_C

Montageschiene mit statischem Nachweis in K2 Base. Variabel einsetzbar für verschiedene Dachanbindungen. Material: Aluminium EN AW-6063 T66

SolidRail Light

Product number: 2004271

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 5.95 m. Material: aluminium EN AW-6063 T66

SingleRail 50; 3.65 m

Product number: 2003606

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 3.65 m. Material: Aluminium EN AW-6063 T66

SingleRail 50; 4.80 m

Product number: 2004414

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: Aluminium EN AW-6063 T66

SolidRail Light; 4.80 m, black anodised

Product number: 2004397

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 4.80 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.

SolidRail Medium; 4.80 m

Product number: 2004415

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66

SolidRail Alpin; 5.95 m

Product number: 2004275

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. For high span width. Length 5.95 m. Material: aluminium EN AW-6063 T66

Roof Hook SingleHook 3S Light

Product number: 2004795

Roof hook with triple height adjustment in the base plate (40/47/55 mm). For rafters from 48 mm (narrow rafters from 36 mm possible with M6 wood construction screw). 6 mm bracket thickness, ideal for concrete roof tiles. With pre-assembled Climber 36/50 and cylinder head screw. For fastening the K2 SingleRail and CrossRail mounting rail. Material: Aluminium EN AW-6063 T66; stainless steel A2.

SolidHook Pan Tile H38/124 35x6

Product number: 1000096

Z-shaped roof hook for attaching K2 system components to roofs with pantile tiles. Structural component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Base plate: 180x80x4 mm, height under bracket: 38 mm, bracket height: 69 mm, total height: 124 mm, bracket depth: 91 mm. Material: stainless steel (1.4016)

SolidHook Vario 1 pantile

Product number: 1000125

Single height-adjustable Z-shaped roof hook for attaching K2 system components to roofs with pantile tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Dimensions: Base plate: 150x60x5 mm, height under bracket: 43 mm, bracket height: 55-90 mm, bracket: 30x6 mm, total height: approx. 112-145 mm. Material: stainless steel (1.4016)

SolidHook Vario 2 pantile

Product number: 1000107

2-way height-adjustable Z-shaped roof hook for attaching K2 system components to roofs with pantile tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Dimensions: Base plate: 140x55x5 mm, height under bracket: 49-58 mm, bracket height: 57-76 mm, total height: 128-156 mm. Material: stainless steel (1.4016)

Roof Hook SingleHook 3S Long

Product number: 2004222

Roof fastener with 3x vertically adjustable base plate (40,47,54 mm) and long bracket. For rafters from 48 mm (narrow rafters from 36 mm possible with M6 wood construction screw). With pre-assembled K2 Climber 36/50 and allen bolt. Used for fixation on the K2 mounting rail type K2 SingleRail and CrossRail. Material: Aluminium EN AW-6063 T66; Stainless steel A2

Roof Hook SolidHook 3S+

Product number: 2002390

Roof hooks with 3 height adjustments in the base plate (40/47/54 mm) and slotted hole in the bracket for vertical SolidRail mounting. Base plate: 124x100, Height under Bracket: 40/47/54 mm, bracket: 35x9 mm, Overall height: 123/130/137 mm. Material: Aluminium EN AW-6063 T66

Roof Hook for Pan Tile (Alpin)

Product number: 1000764

Z-shaped alpine roof hook for attaching K2 system components to tiled roofs with interlocking tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Dimensions: Base plate: 180x80x5 mm, height under bracket: 47 mm, bracket height: 55 mm, total height: 121 mm, bracket depth: 87 mm. Material: stainless steel (1.4016)

Roof Hook Vario 2 Narrow Rafters

Product number: 2004244

Adjustable Roof Fastener SolidHook Vario 2 for Pan Tile. For fastening of K2 System parts on roofs with pan tiles. Bracket with elongated hole to fix the SolidRail with T-Bolt and nut M10. Dimension: Base plate: 140x55x5 mm, Height under bracket: 49-58 mm, Bracket height: 57-76 mm, Total height: 128-156 mm. Material: Stainless steel (1.4016)

The borehole pattern with slotted boreholes in the base plate makes this variant suitable for narrow rafters.

Roof Hook SingleHook 4S

Product number: 2003144

Roof fastener with 3x vertically adjustable base plate (40,47,54 mm) and 30 mm adjusment on the bracket. Total hight adjustment: 120.5 mm - 165.1 mm. For rafters from 48 mm (narrow rafters from 36 mm possible with M6 wood construction screw). With pre-assembled K2 Climber 36/50 and allen bolt. Used for fixation on the K2 mounting rail type K2 SingleRail and CrossRail. Material: Aluminium EN AW-6063 T66; Stainless steel A2

Roof Hook SolidHook 4S+

Product number: 2002402

Roof hook with 3 height adjustments in the base plate (40/47/54 mm) and 30 mm adjustment on the bracket. Slotted hole in the bracket for vertical SolidRail mounting. Base plate: 124x100 mm, Height under bracket: 40/47/54 mm, bracket: 35x9 mm, Overall height: 120.5 - 165 mm. Material: Aluminium EN AW-6063 T66

Roof Hook for Pan Tile H47/134 30x6

Product number: 1000001

Z-shaped roof hook for attaching K2 system components to roofs with pantile tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and collar nut M10. Base plate: 150x60x5 mm, bracket: 30x6 mm, height under bracket 47 mm (suitable for roof battens with a height of 30 mm) Total height: approx. 133 mm. Material: stainless steel (1.4016)

Roof Hook for Pan Tile H38/150 35x6

Product number: 1000653

Z-shaped roof hook for attaching K2 system components to roofs with pantile tiles. Structural component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Base plate: 180x80x4 mm, height under bracket: 38 mm, bracket height: 89 mm, total height: 150 mm, bracket depth: 91 mm. Material: stainless steel (1.4016)

Roof Hook for Pan Tile H47/138 35x6

Product number: 1001508

Z-shaped roof hook with long arm for attaching K2 system components to tiled roofs with large flat tiles. Structural component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Base plate: 180x80x4 mm, arm: 35x6 mm, height under arm: 47 mm, arm length: 127 mm, total height: 138.2 mm Material: stainless steel (1.4016)

Roof Hook SingleHook Vario

Product number: 2002651

Dual, height-adjustable Roof Fastener to fasten K2 system components to tile roofs. Bracket with slotted hole for mounting and adjusting the height of the SingleRail. For various battens by means height of bracket infinitely adjustable on baseplate to suit. Including T-Bolt and Locking nut for SingleRail assembly. Material: Stainless steel

Roof Hook SingleHook 3S

Product number: 2003215

Roof fastener with 3x vertically adjustable base plate (40,47,54 mm) for rafters from 48 mm (narrow rafters from 36 mm possible with M6 wood construction screw). With pre-assembled K2 Climber 36/50 and allen bolt. Used for fixation on the K2 mounting rail type K2 SingleRail and CrossRail. Material: Aluminium EN AW-6063 T66; Stainless steel A2

Roof Hook SingleHook Alpin

Product number: 2003155

To fasten K2 system components to tile roofs. Slotted bore hole bracket for installation and height adjustability of the SingleRail. Including T-Bolt and Locking nut for SingleRail assembly. Only to be used in combination with a sheet metal roof tile. Material: Aluminium EN AW-6063 T66

Roof Hook SingleHook 2

Product number: 2003175

Z-shaped stainless steel roof hook for attaching K2 system components exclusively to tiled roofs with flat concrete roof tiles that meet the requirements of BS EN 490. Construction component with fastening elements. With pre-assembled Climber 36/50 and cylinder head screw for K2 SingleRail installation. Material: stainless steel (1.4301)

Roof Hook for Slate Tile

Product number: 1000373

For fastening of K2 System parts on slate roofs. Bracket with elongated hole to fix the SolidRail with T-Bolt M10. Bracket: 40x250x6 mm, Total height: 72 mm. Material: stainless steel A2 (1.4301)

Roof Hook SingleHook FT

Product number: 2002568

Roof hooks for flat tiles. Bracket with long hole for direct mounting and height adjustment of the SingleRail. Including T-bolt M8x25 (stainless steel A2) and locking nut M8 (stainless steel A2). Material: stainless steel

Roof Hook SingleHook 2G

Product number: 2000636

Special roof hook version for metal-tile-roof plate with 3 height adjustments in the base plate and 30mm adjustability in the bracket. Usable without roof holes. Material: aluminium EN AW-6063 T66

Roof Hook for Coppo-Tiles

Product number: 1001068

Single height-adjustable Z-shaped roof hook for attaching K2 system components to roofs with Coppo tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Dimensions: Base plate: 150x60x5 mm, height under bracket: 18.5 mm, bracket height: 100 - 135 mm, total height: 137 - 167 mm, bracket depth: 130 mm. Material: stainless steel (1.4016)

Baseplate SingleBoard 2.10 m

Product number: 2002935

The SingleBoard allows you to add an additional roof hook of SingleHook 1.1 in between two rafters. It also allows you to move existing Roof Hook individually. This can be the case in roof edge areas or with obstacles. Material: Aluminium EN AW-6063 T66

Roof Hook Bracket SingleHook 1.1

Product number: 2003152

Bracket of the SingleHook 1.1 roof hook incl. screws and nuts. To be used with the K2 SingleBoard (2002935). Material: Aluminium EN AW-6063 T66 and stainless steel A2

Roof Hook bracket SingleHook 4S

Product number: 2002927

Bracket of the SingleHook 4S incl. Climber and allen bolt. To be used with the K2 SingleBoard 3S/4S (2001972). Material: Aluminium EN AW-6063 T66 and stainless steel A2

Baseplate SingleBoard 3S/4S; 2.10 m

Product number: 2001972

The SingleBoard 3S/4S allows you to add an additional roof hook of SingleHooks in between two rafters. It also allows you to move existing Roof Hook individually. This can be the case in roof edge areas or with obstacles. Material: Aluminium EN AW-6063 T66

SingleHook FlatTile sheet metal

Product number: 2004440

To ensure proper waterproofing of the SingleHook FLA (2004416) roof hook designed for use with plain tile flashings, the use of our metal covers with aluminium 3.0205 (EN-AW-1200) butyl strips is required. Two metal covers measuring 300mm x 260mm are required per roof hook to ensure adequate watertightness. Colour: Anthracite

SingleHook FlatTile

Product number: 2004416

The K2 SingleHook FlatTile is perfect for fastening the K2 system components on flat tile roofs. The roof hook has a slotted hole for SingleRail mounting. The K2 SingleRail mounting rail can be fixed to the SingleHook FlatTile with a T-bolt M8x20 (1002387) and a flanged nut M8 (2002744). Two metal roof plates (2004282 or 2004440) are required for each roof hook. With a total height of approx. 144 mm and an bracket of 75x4 mm, this roof hook is a perfect solution to securely and efficiently fasten the K2 system components. The roof hook is made of Magnelis 1.0242 (S250GD+ZM310), so you also get a durable and high-quality fastening.

SingleHook FlatTile sheet metal

Product number: 2004282

To ensure proper waterproofing of the SingleHook FLA (2004416) roof hook designed for use with clay brick roofs with flat tile roofing, the use of our metal covers with aluminium 3.0205 (EN-AW-1200) butyl strips is required. Two metal covers measuring 300mm x 260mm are required per roof hook to ensure adequate watertightness. Colour: Red.

Roof Hook for Flat Tile

Product number: 2003073

DISCONTINUED

Alternative article: 2004416

For fastening of K2 System parts on clay brick roofs with flat tile roofing. Bracket with elongated hole to fix the SolidRail with T-Bolt and Nut M10. Overall height: approx. 119 mm; Bracket: 75x4 mm, Height under bracket: 33 mm. Material: Magnelis 1.0242 (S250GD+ZM310)

SingleHook FlatTile sheet metal

Product number: 2004282_C

print.noImage

To ensure proper waterproofing of the SingleHook FLA (2004281) roof hook designed for use with clay brick roofs with flat tile roofing, the use of our metal covers with aluminium 3.0205 (EN-AW-1200) butyl strips is required. Two metal covers measuring 300mm x 260mm are required per roof hook to ensure adequate watertightness. Colour: Red.

Roof Hook for Flat Tile

Product number: 1000214

Z-shaped stainless steel roof hook for fastening of K2 System parts on clay brick roofs with flat tile roofing. Structural component with fastening elements. Bracket with elongated hole to fix the SolidRail with T-Bolt and Nut M10. Base plate: 40x50 mm, Height under bracket: 33 mm, Bracket height: 62 mm, Total height: 122 mm, Bracket depth: 189 mm. Material: Stainless steel A2 (1.4301)

Rail connector Set SolidRail UltraLight and Light

Product number: 1004107

For quick and easy connection of two K2 SolidRail XS, UltraLight or Light. Set including screws and nuts.

Rail connector Set SolidRail Medium and Alpin

Product number: 1004109

For quick and easy connection of two K2 SolidRail Medium or Alpin. Set including screws and nuts. Material: Aluminium EN AW-6063 T66 / Stainless steel A2

K2 Clamp MC 25-40

Product number: 2004537

New

K2 Clamp - Universal clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW 6063 T66, Thermoplastic, stainless steel A2

K2 Clamp MC 25-40, Black anodised

Product number: 2004540

New

Black anodized Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, thermoplastic, stainless steel A2. Anodising may show slight signs of scratching due to packaging and transport.

K2 Clamp EC 25-37mm

Product number: 2004149

DISCONTINUED

Black anodized universal module end clamp for fixing solar modules with frame heights of 25- 37 mm. Not compatible with the K2 Dome 6 System.

K2 Clamp EC 25-37mm

Product number: 2004147

DISCONTINUED

Alternative article: 2002514 or 2003451

Universal module end clamp for fixing solar modules with frame heights of 25-37mm. Not compatible with the K2 Dome 6 System.

K2 Clamp MC 25-40 mm

Product number: 2004146

Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.

K2 Clamp MC 25-40 mm

Product number: 2004148

Phase out item

Alternative article: 2004540

Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Eloxal may show slight signs of scratching due to packaging and transport.

K2 Clamp EC 25-37mm

Product number: 2004147_C

Universal Modulendklemme zum Fixieren von Solarmodulen mit Rahmenhöhen 25-37 mm. Nicht kompatibel mit dem K2 Dome 6 System.

K2 Clamp MC 25-40 mm

Product number: 2004146_C

Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.

K2 Clamp EC 25-40, black anodised

Product number: 2004545

Black anodized Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, stainless steel, Thermoplastic. Anodising may show slight signs of scratching due to packaging and transport.

K2 Clamp EC 25-40

Product number: 2004543

New

Universal module end clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, Stainless steel, Thermoplastic.

Laminate end clamp Click 5.0

Product number: 1002562

Laminate end clamp Click 5.0 approved for modules from SoliTek/ViaSolis, S-Energy, Sonnenstromfabrik / CS Wismar and for modules with a glass thickness of 5.0-6.2 mm. Length: 100 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: Aluminium EN AW 6063-T66; EPDM

Laminate middle clamp Click 5.0 black

Product number: 1005645

Laminate middle clamp Click 5.0 for module mounting black. length: 100mm; for modules with a glass thickness of 5.0 - 6.2 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Surface: bar anodized in E6/C35; Material: EN AW 6063 T66; EPDM

Laminate middle clamp Click 5.0

Product number: 1002561_C

Laminate middle clamp Click 5.0 approved for modules from SoliTek/ViaSolis, S-Energy, Sonnenstromfabrik / CS Wismar and for modules with a glass thickness of 5.0-6.2 mm. Length: 100 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: Aluminium EN AW 6063-T66; EPDM

Laminate middle clamp Click 5.0

Product number: 1002561

Laminate middle clamp Click 5.0 approved for modules from SoliTek/ViaSolis, S-Energy, Sonnenstromfabrik / CS Wismar and for modules with a glass thickness of 5.0-6.2 mm. Length: 100 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: Aluminium EN AW 6063-T66; EPDM

Laminate end clamp Click 5.0

Product number: 1002562_C

Laminate end clamp Click 5.0 approved for modules from SoliTek/ViaSolis, S-Energy, Sonnenstromfabrik / CS Wismar and for modules with a glass thickness of 5.0-6.2 mm. Length: 100 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: Aluminium EN AW 6063-T66; EPDM

Module laminat End Clamp Click 6.8

Product number: 1000668

Module end clamp for fastening laminate modules, approved for modules from First Solar, Calyxo, MiaSolÃ© and for modules with a glass thickness of 6.8 - 8.0 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: Aluminium press finished, EPDM

Module laminat Middle Clamp Click 6.8

Product number: 1000667

Module middle clamp for fastening laminate modules, approved for modules from First Solar, Calyxo, MiaSolÃ© and for modules with a glass thickness of 6.8 - 8.0 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: Aluminium press finished, EPDM

Laminate end clamp Click 5.0, black

Product number: 1005646

Laminate end clamp Click 5.0 black for module mounting. Length: 100 mm, For modules with a glass thickness of 5.0 - 6.2 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: aluminium EN AW 6063-T66 black anodised, EPDM

SlideGuard

Product number: 1005828

Slide guard for additional use in vertical assembly of laminated modules with glass thickness of 6 - 9 mm. Material: stainless steel 1.4016, EPDM

BlackCover SolidRail UltraLight

Product number: 2004797

New

Black Rail Cover for SolidRail UltraLight

BlackCover SingleRail 36

Product number: 2003523

K2 BlackCover for black covering of the rail ends of the K2 SingleRail 36 and K2 SingleRail 36 light. Length of the cover: 150 mm.

Self-drilling wood screw Ø 8,0 mm

Product number: 2004110

Plate head wood construction screw 8x60 with ETA certification that ensures fast and secure installation without pre-drilling. Drive: T-Drive (T-40), material: A2 stainless steel. Manufacturer: HECO, Reisser or E.u.r.o. Tec.

Self-drilling wood construction screw with disc head Ø 8.0 mm - S + P

Product number: 2004448

Flange head wood screw 8x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Full thread (72mm). Material: Stainless steel A2. Manufacturer: Schäfer + Peters

Self-drilling wood construction screw with disc head Ø 8.0 mm - Reisser

Product number: 2004449

Flange head wood screw 8x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Full thread (74,5mm). Material: Stainless steel A2. Manufacturer: Reisser

Self-drilling wood construction screw with disc head Ø 8.0 mm - Reisser

Product number: 2004449_C

print.noImage

Self-drilling wood construction screw with disc head Ø 8.0 mm - S + P

Product number: 2004448_C

print.noImage

Self-drilling wood construction screw with disc head Ø 8.0 mm - E.u.r.o.Tec

Product number: 2003455_C

Self-drilling wood screw Ø 8,0 mm

Product number: 2004113

Plate head wood construction screw 8x120 with ETA certification that ensures fast and secure installation without pre-drilling. Drive: T-Drive (T-40), material: A2 stainless steel. Manufacturer: HECO or Reisser.

Self-drilling wood screw Ø 8,0 mm

Product number: 2004116

Flange head wood screw 8x180 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40), Thread: part thread. Material: stainless steel A2

Wood screw countersunk head 6x70/42

Product number: 1006398

Head timber screws, drilling-point and Countersunk head 6x70/42. Drive size: TX25. Material: A2

Self-drilling wood screw Ø 6,0 mm

Product number: 2004106

Flange head wood screw 6x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-25), Thread: Full thread. Material: stainless steel A2

Self-drilling wood construction screw with disc head Ø 8.0 mm - S + P

Product number: 2004450

Flange head wood screw 8x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (80 mm). Material: stainless steel A2. Manufacturer: Schäfer + Peters

Self-drilling wood screw Ø 6,0 mm

Product number: 2004107

Flange head wood screw 6x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-25), Thread: part thread Material: stainless steel A2

Self-drilling wood construction screw with disc head Ø 8.0 mm - E.u.r.o.Tec

Product number: 2003456

Flange head wood screw 8x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (60 mm). Material: stainless steel A2. Manufacturer: Eurotec

Self-drilling wood screw Ø 8,0 mm

Product number: 2004111

Plate head wood construction screw 8x80 with ETA certification that ensures fast and secure installation without pre-drilling. Drive: T-Drive (T-40), material: A2 stainless steel. Manufacturer: HECO, Reisser or E.u.r.o. Tec.

Self-drilling wood construction screw with disc head Ø 8.0 mm - Reisser

Product number: 2003457

Flange head wood screw 8x120 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (80 mm). Material: stainless steel A2. Manufacturer: Reisser

Self-drilling wood screw Ø 6,0 mm

Product number: 2004106_C

print.noImage

Flange head wood screw 6x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-25), Thread: Full thread. Material: stainless steel A2

Self-drilling wood screw Ø 8,0 mm

Product number: 2004112_C

print.noImage

Plate head wood construction screw 8x80 with ETA certification that ensures fast and secure installation without pre-drilling. Drive: T-Drive (T-40), material: A2 stainless steel. Manufacturer: HECO, Reisser or E.u.r.o. Tec.

Self-drilling wood construction screw with disc head Ø 8.0 mm - E.u.r.o.Tec

Product number: 2003455

Flange head wood screw 8x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (48 mm). Material: Stainless steel A2. Manufacturer: Eurotec

Self-drilling wood construction screw with disc head Ø 8.0 mm - Reisser

Product number: 2004451

Flange head wood screw 8x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (80 mm). Material: stainless steel A2. Manufacturer: Reisser

Self-drilling wood screw Ø 8,0 mm

Product number: 2004117

Flange head wood screw 8x200 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40), Thread: part thread. Material: stainless steel A2

Self-drilling wood screw Ø 8,0 mm

Product number: 2004112

Plate head wood construction screw 8x100 with ETA certification that ensures fast and secure installation without pre-drilling. Drive: T-Drive (T-40), material: A2 stainless steel. Manufacturer: HECO, Reisser or E.u.r.o. Tec.

Self-drilling wood screw Ø 8,0 mm

Product number: 2004115

Flange head wood screw 8x160 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40), Thread: part thread. Material: stainless steel A2

T-Bolt 28/15 M10

Product number: 1000571

T-Bolt M10x25 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M10x25. Material: stainlesteel A2 (1.4301)

T-Bolt 28/15 M8

Product number: 1000368

T-Bolt M10x30 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M10x25. Material: stainlesteel A2 (1.4301)

T-Bolt 28/15 M10

Product number: 1000637

T-Bolt M10x20 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M10x20. Material: stainlesteel(1.4301)

T-Bolt 28/15 M10

Product number: 1000041

T-Bolt M10x30 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M10x30. Material: stainlesteel(1.4301)

T-Bolt 28/15 M8

Product number: 1000614

T-Bolt M8x20 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M8x20. Material: stainlesteel(1.4301)

T-Bolt 28/15 M10

Product number: 1000637_C

print.noImage

T-Bolt M10x20 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M10x20. Material: stainlesteel(1.4301)

T-Bolt 28/15 M8

Product number: 1000614_C

print.noImage

T-Bolt M8x20 for insertion into the bottom chamber of K2 SolidRail. It can be inserted at any position and can be moved later if necessary. Head form: 28/15. Head dimensions: 22.5x10.5x4 mm. Thread of screw: M8x20. Material: stainlesteel(1.4301)

Self-locking hexagon nut serration M8

Product number: 2002744

Nut with serration flange and plastomer-inlay for save locking according, DIN 6926. Material: Stainless steel A2

Hexagon Flange nut with serration M8

Product number: 1000043

Hexagon flange nuts with serration M8; DIN 6923 A2 M8. The Serration prevents accidental release. Material: A2 stainless steel; Drive size:A/F 13

Hexagon Flange nut with serration M10

Product number: 1000042

Hexagon flange nuts with serration M10; DIN 6923 A2 M 10. The Serration prevents accidental release. Material: A2 stainless steel; Drive size:A/F 15.

Solar Cable Manager

Product number: 2002870

Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm

InsertionRail CableClip

Product number: 2002767

Phase out item

Plastic Profilee to hold the DC wiring in the K2 InsertionRail System. Material: polycarbonate. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

External cable clip OMEGA D for solar cables

Product number: 1005394

External cable clip of solar cables for cables extending beyond K2 rails. Fixation in the C-chamber of the Profilee. Material: Polypropylen with UV stabiliser, black

EndCap for SolidRail Light

Product number: 1004765

K2 End Cap for K2 SolidRail Light 37. Material: glass fibre reinforced polyamid

EndCap for SingleRail 36

Product number: 1004767

K2 End Cap for K2 SingleRail 36, SingleRail 36 ight and CrossRail 36. Material: glass fibre reinforced PA or PA type 6

EndCap for SolidRail Medium

Product number: 1004766

K2 End Cap for K2 SolidRail Medium 42. Material: glass fibre reinforced polyamid

EndCap for SolidRail Alpin

Product number: 1005053

K2 End Cap for K2 SolidRail Alpin 60. Material: glass fibre reinforced polyamid

StairPlate Set

Product number: 2004057

The K2 StairPlate is the perfect solution for installing Micro Inverters and Optimizers from manufacturers such as SolarEdge, Huawei, BRC Solar and Enphase. With the StairPlate, these devices can be easily hooked into almost all K2 mounting rails without having to screw them directly to the roof. The units are attached to the K2 StairPlate in advance with the appropriate screws and nuts. Please note the height of the modules and the units to be used. Can only be used to a limited extent when using AddOn. Material: Stainless steel

Distance plate for roof hooks

Product number: 1000005

G-shaped Regulator disc for compensating height differences when mounting the K2 SolidRail on the corresponding roof fixings. Material thickness: 2 mm. Material: aluminium

Roof hook height Compensator 4 mm

Product number: 2002332

Base plate shim to underlay roof hook base plates for height compensation of battens. Dimensions: 111x100x4 mm. Compatible with SingleHook 1.1, SingleHook 3S, SingleHook 4S, SingleHook Vario.

Distance pad

Product number: 1002361

The K2 distance pad is ideal for height compensation mounting of threaded roof hooks and the K2 SingleRail. These distance pads are placed between the roof hooks and the Climbers and allow individual height compensation. You can use up to two distance pads on top of each other. Each pad has a material thickness of 2 mm and is made of robust polyamide.

TerraGrif QL

Product number: 2004231

Mounting accessories for establishing equipotential bonding of the K2 mounting systems or for earthing the module frames. Compatible moduleclamp: K2 Clamp 25-40.

TerraGrif K2SZ

Product number: 2001881

Mounting accessories for establishing equipotential bonding of the K2 mounting systems or for earthing the module frames. Incompatible systems: BasicRail (landscape mounting). Material: stainless steel 301 TA

TerraGrif K2U17 Portrait

Product number: 2000056

The mounting accessory enables potential equalisation of the K2 mounting systems or earthing of the module frames. The TerraGrif K217 can be easily attached to the underside of the module frame and is compatible with almost every module type. The material is 301 TA stainless steel and can be placed in the area of the adjacent elevation or mounting system components.

Lightning protection clamp 8mm Set

Product number: 2004922

New

Lightning protection clamp for clamping lightning protection cables with a diameter of 8 mm. Includes MK2 insert nut with mounting clip and M8x25 pan head screw.

Climber 36/50 Set

Product number: 2003145

A cross connector for the K2 SingleRail 36 & 50 and the K2 CrossRail 36 & 48. Nuts and bolts included. Material: aluminium EN AW-6063 T66, stainless steel A2

SolidRail CrossConnector Set

Product number: 1004110

Angle bracket set for rail cross connection to a 90Â° angle. Constructions suitable for K2 SolidRails Light, Medium and Alpin. Nuts and bolts included. Material: Stainless steel and PA

L-Adapter SingleRail Set

Product number: 2002683

Connection set to attach the SingleRail to SolidHook roof hooks. Set consists of: 1x L-adapter SingleRail (2002652), aluminium EN AW-6063 T66. 1x self-locking nut M8 (2002744), stainless steel A2. 1x T-Bolt M8x20 (1002387), stainless steel A2. 1x Mushroom head bolt M10x25 (1000432), stainless steel A2. 1x Serrated nut M10 (1000042), stainless steel A2.

SpeedFlash® Kit

Product number: 2004569

SFP005 SpeedFlash Kit from Genius Roof Solutions™

The SpeedFlash is a flashing solution for roof hook systems on slate roofs.

Kit consists of: 1x SpeedFlash Base & Cap, 1x Spring Support, 2x Shims, 1x Foam Insert

Rail connector Set SingleRail 36/50

Product number: 2001976

Phase out item

Alternative article: 2003605

Rail connector set as connecting element between two K2 SingleRails 36 or two K2 SingleRail 50. Screw included.

InsertionRail

Product number: 2004085_C

print.noImage

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 30 mm. Material: Aluminium EN AW-6063 T66

InsertionRail

Product number: 2004216

Phase out item

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 35 mm. Material: Aluminium EN AW-6063 T66. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

InsertionRail, black anodized

Product number: 2004086_C

print.noImage

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 30 mm. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.

K2 Clamp EC 30-40, Hybrid

Product number: 2003451

DISCONTINUED

Alternativartikel: 2002514

Universal Modulendklemme zum Fixieren von Solarmodulen mit Rahmenhöhen 30-40 mm. Nicht kompatibel mit dem K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, Badamid B70, Edelstahl A2

InsertionRail, black anodized

Product number: 2004086

DISCONTINUED

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 30 mm. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

TerraGrif S

Product number: 2002397

Phase out item

Mounting accessories for establishing equipotential bonding of the K2 insertion system or for earthing the module frames. Material: stainless steel (301 TA)

Rail connector InsertionRail, black anodized

Product number: 2002765

Phase out item

Rail connector InsertionRail, black anodized

Rail connector for quick and easy connection of two K2 InsertionRails. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

Rail connector Set SingleRail 50

Product number: 2002404

Phase out item

Alternative article: 2003605

Rail connector set as connecting element between two K2 SingleRails 50. screw included.

Universal End Clamp OneEnd

Product number: 2002514

Phase out item

Alternative article: 2004543

Universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM

InsertionRail

Product number: 2004085

Phase out item

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 30 mm. Material: Aluminium EN AW-6063 T66. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

Rail connector InsertionRail

Product number: 2002764

Phase out item

Rail connector for quick and easy connection of two K2 InsertionRails. Material: Aluminium EN AW-6063 T66. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

InsertionRail

Product number: 2002739

DISCONTINUED

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 40 mm. Material: Aluminium EN AW-6063 T66

InsertionRail, black anodized

Product number: 2004217

Phase out item

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 35 mm. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

K2 Clamp EC 30-40, Hybrid

Product number: 2003451_C

print.noImage

Universal module end clamp for fixing solar modules with frame heights of 30-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, Badamid B70, stainless steel A2

Universal End Clamp OneEnd, black anodized

Product number: 2002589

Phase out item

Universal End Clamp OneEnd, black anodized

Alternative article: 2004545

Black anodized universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.

InsertionRail, black anodized

Product number: 2002759

DISCONTINUED

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 40 mm. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.

InsertionRail EndStop

Product number: 2002760

Phase out item

End angle for K2 InsertionRail. Incl. grub screws with hexagon socket - ISO 4026 - M8x6. Material: Aluminium EN AW 6063 T66, stainless steel A2. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

Lightning protection clamp Alu 8mm - Set

Product number: 2002473

Phase out item

Lightning protection clamp Alu 8mm - Set

Alternative article: 2004922

Lightning protection clamp for clamping Ø 8mm lightning protection cables. Including MK2 slot nut, Washer (8,4x20x1,2 mm) and stainless steel socket screw M8x30.

InsertionRail EndStop, black anodized

Product number: 2002761

Phase out item

End angle for K2 InsertionRail. Incl. grub screws with hexagon socket - ISO 4026 - M8x6. Material: Aluminium EN AW 6063 T66 black anodised, stainless steel A2. Eloxal may show slight scratches as a result of packaging and transport. The successor to the K2 InsertionRail system is the K2 InsertionRail 2.0 system.

K2 Clamp EC 30-40 Black, Hybrid

Product number: 2003452

DISCONTINUED

Alternative article: 2004545

Black anodized universal module end clamp for fixing solar modules with frame heights of 30-40 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66, Badamid B70, stainless steel A2