Hanger bolt SolidRail M10

Product number: 2000122

K2 SolidRail Hanger Bolt Set M10x250 with adapter plate and fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Length wood thread 67 mm. Length metric thread 85 mm. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SingleRail M10

Product number: 2003272

K2 SingleRail Hanger Bolt Climber Set M10x180 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SingleRail M12

Product number: 2003275

K2 SingleRail Hanger Bolt Climber Set M12x200 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SingleRail M12

Product number: 2003276

K2 SingleRail Hanger Bolt Climber Set M12x250 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SolidRail M10

Product number: 2000120

K2 SolidRail Hanger Bolt Set M10x180 with adapter plate and fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Length wood thread 67 mm. Length metric thread 85 mm. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SingleRail M10

Product number: 2003274

K2 SingleRail Hanger Bolt Climber Set M10x250 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SolidRail M12

Product number: 2000125

K2 SolidRail Hanger Bolt Set M12x300 with adapter plate and fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Length wood thread 100 mm. Length metric thread 150 mm. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SolidRail M12

Product number: 2000123_C

K2 SolidRail Hanger Bolt Set M12x200 with adapter plate and fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Length wood thread 80 mm. Length metric thread 100 mm. General approval. Material: Stainless steel A2/ Aluminium/ EPDM

Hanger bolt SingleRail M10

Product number: 2003273

K2 SingleRail Hanger Bolt Climber Set M10x200 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SolidRail M10

Product number: 2000120_C

K2 SolidRail Hanger Bolt Set M10x180 with adapter plate and fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Length wood thread 67 mm. Length metric thread 85 mm. General approval. Material: Stainless steel A2/ Aluminium/ EPDM

Hanger bolt SolidRail M10

Product number: 2000121

K2 SolidRail Hanger Bolt Set M10x200 with adapter plate and fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Length wood thread 67 mm. Length metric thread 85 mm. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SolidRail M12

Product number: 2000123

K2 SolidRail Hanger Bolt Set M12x200 with adapter plate and fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Length wood thread 80 mm. Length metric thread 100 mm. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SingleRail M12

Product number: 2003277

K2 SingleRail Hanger Bolt Climber Set M12x300 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval Material: Stainless steel A2/ Aluminium/ EPDM Article is procured on the basis of order - return excluded.

This is an exemplary illustration and may vary depending on the design.

Hanger bolt SingleRail M12

Product number: 2003275_C

print.noImage

K2 SingleRail Hanger Bolt Climber Set M12x200 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM

Hanger bolt SingleRail M10

Product number: 2003272_C

K2 SingleRail Hanger Bolt Climber Set M10x180 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM

Hanger bolt SolidRail M12

Product number: 2000124

K2 SolidRail Hanger Bolt Set M12x250 with adapter plate and fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Length wood thread 100 mm. Length metric thread 100 mm. General approval. Material: Stainless steel A2/ Aluminium/ EPDM.

This is an exemplary illustration and may vary depending on the design.

Solarfastener M10x50 with fibre-cement seal for wood substructure

Product number: 1002001

Solar fastener 8x150 / M10x50 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for wood substructure

Product number: 1002130

Solar fastener 8x80 / M10x50 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for wood substructure

Product number: 1001759

Solar fastener 8x130 / M10x50 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for wood substructure

Product number: 1003029

Solar fastener 8x100 / M10x50 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50with fibre-cement seal for wood substructure

Product number: 1002533

Solar fastener 8x180 / M10x50 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for wood substructure

Product number: 1003029_C

print.noImage

Solar fastener 8x100 / M10x50 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval (Z-14.4-532). Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener with calotte for wood substructure

Product number: 1002749

Solar fastener 8x200 / M10x50 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with calotte for wood substructure

Product number: 1001770

Solar fastener 8x100 / M10x50 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with calotte for wood substructure

Product number: 1002228

Solar fastener 8x80 / M10x50 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with calotte for wood substructure

Product number: 1000807

Solar fastener 8x150 / M10x50 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with calotte for wood substructure

Product number: 1001511

Solar fastener 8x130 / M10x50 for fastening the K2 Systems components in the wooden substructure.
With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with calotte for wood substructure

Product number: 1001627

Solar fastener 8x180 / M10x50 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with calotte for wood substructure

Product number: 1001770_C

print.noImage

Solar fastener 8x100 / M10x50 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal Profilees and sandwich panels elements. With general building approval (Z-14.4-532). Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for steel substructure

Product number: 2003013

Solar fastener 8x85 / M10x50 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for steel substructure

Product number: 2003012_C

print.noImage

Solar fastener 8x115 / M10x50 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. General approval (Z-14.4-532). Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for steel substructure

Product number: 2003012

Solar fastener 8x115 / M10x50 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for steel substructure

Product number: 2003016

Solar fastener 8x155 / M10x50 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with fibre-cement seal for steel substructure

Product number: 2003017

Solar fastener 8x195 / M10x50 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with calotte for steel substructure

Product number: 2003020

Solar fastener 8x155 / M10x50 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded.
The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with calotte for steel substructure

Product number: 2003019

Solar fastener 8x115 / M10x50 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded.
The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener M10x50 with calotte for steel substructure

Product number: 2003019_C

print.noImage

Solar fastener 8x115 / M10x50 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. General approval (Z-14.4-532). Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x50 with calotte for steel substructure

Product number: 2003021

Solar fastener 8x195 / M10x50 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded.
The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with calotte for steel substructure

Product number: 2003018

Solar fastener 8x85 / M10x50 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded.
The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener with fibre-cement seal for wood substructure

Product number: 1005263

Solar fastener 8x150 / M10x70 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener with fibre-cement seal for wood substructure

Product number: 1001420

Solar fastener 8x200 / M10x70 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener with fibre-cement seal for wood substructure

Product number: 1006058

Solar fastener 8x130 / M10x70 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x70 with fibre-cement seal for wood substructure

Product number: 1006058_C

Solar fastener 8x130 / M10x70 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval (Z-14.4-532). Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x70 with calotte for wood substructure

Product number: 1006125

Solar fastener 8x100 / M10x70 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener M10x70 with calotte for wood substructure

Product number: 1005906

Solar fastener 8x200 / M10x70 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener M10x70 with calotte for wood substructure

Product number: 1006125_C

Solar fastener 8x100 / M10x70 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal Profilees and sandwich panels elements. With general building approval (Z-14.4-532). Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x70 with calotte for wood substructure

Product number: 1004286

Solar fastener 8x80 / M10x70 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener M10x70 with fibre-cement seal for steel substructure

Product number: 2003031

Solar fastener 8x195 / M10x70 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x70 with fibre-cement seal for steel substructure

Product number: 2003029_C

print.noImage

Solar fastener 8x115 / M10x70 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. General approval (Z-14.4-532). Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x70 with fibre-cement seal for steel substructure

Product number: 2003029

Solar fastener 8x115 / M10x70 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x70 with fibre-cement seal for steel substructure

Product number: 2003028

Solar fastener 8x85 / M10x70 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x70 with fibre-cement seal for steel substructure

Product number: 2003030

Solar fastener 8x155 / M10x70 with fiber cement seal and hardened tip. For fixing the K2 Systems components in the steel substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Solarfastener M10x70 with calotte for steel substructure

Product number: 2003035

Solar fastener 8x195 / M10x70 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener M10x70 with calotte for steel substructure

Product number: 2003032

Solar fastener 8x85 / M10x70 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener M10x70 with calotte for steel substructure

Product number: 2003034

Solar fastener 8x155 / M10x70 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener M10x70 with calotte for steel substructure

Product number: 2003033

Solar fastener 8x115 / M10x70 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: A - Top chord width [mm], B - Profile height [mm], C - Clear width at bottom chord [mm], D - Roof colour [RAL]. For support please complete the below document 'Selection and parameters for solar fastener with calotte' and send it with your order.

Solarfastener M10x70 with calotte for steel substructure

Product number: 2003033_C

print.noImage

Solar fastener 8x115 / M10x70 with calotte and hardened tip (without adapter plate). For fixing the K2 Systems components in the steel substructure, suitable for trapezoidal sheet metal covering. General approval (Z-14.4-532). Material: stainless steel A2. Article is procured on the basis of order - return excluded.

Adapter plate aluminium, M10

Product number: 2002544

Adapter plate for Hanger Bolt and Solar Fastener M10. 40x90 mm. Material: Aluminium

Adapter plate aluminium, M12

Product number: 2002545

Adapter plate for Hanger Bolt and Solar Fastener M12. 40x90 mm. Material: Aluminium

Eternit solar sealing sheet SVZ

Product number: 2004436_C

The solar sealing plate is the perfect solution for installing a K2 hanger bolt mounting system on flat Eternit tiles. The additional use of the solar sealing plate between two Eternit panels ensures water drainage and also minimizes the risk of tile breakage by distributing the pressure load. The plate is suitable for hanger bolts with a diameter of 10-12 mm. Dimensions: 250x380 mm. Manufacturer: Malmur. Material: AZ185 galvanized sheet steel.

Eternit solar sealing sheet SVZ

Product number: 2004436

The solar sealing plate is the perfect solution for installing a K2 hanger bolt mounting system on flat Eternit tiles. The additional use of the solar sealing plate between two Eternit panels ensures water drainage and also minimizes the risk of tile breakage by distributing the pressure load. The plate is suitable for hanger bolts with a diameter of 10-12 mm. Dimensions: 250x380 mm. Manufacturer: Malmur. Material: AZ185 galvanized sheet steel.

Eternit solar sealing sheet SVZ

Product number: 2004437

The solar sealing plate is the perfect solution for installing a K2 hanger bolt mounting system on flat Eternit tiles. The additional use of the solar sealing plate between two Eternit panels ensures water drainage and also minimizes the risk of tile breakage by distributing the pressure load. The plate is suitable for hanger bolts with a diameter of 10-12 mm. Dimensions: 250x580 mm. Manufacturer: Malmur. Material: AZ185 galvanized sheet steel.