K2 Dome 6 System : Description
20/06/2026

K2 Dome 6 System

K2 Dome 6 System Solutions for all roof coverings. Clearly ballast-optimised system based on the latest wind tunnel standards.
  • Flat roof all-rounder - solutions for all roof coverings
  • Ballast-optimised system, based on the latest wind tunnel standards
  • Secure anchoring with fixed connection for roofs < 10° and low load reserves
  • Component-optimised system
K2 Dome 6 System : Description
20/06/2026

Technical data

D-Dome
Scope of application Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs
Fastening type/­roof fixture
  • Ballasted and no roof penetration for inclination: ≤ 3°
  • With fixed connection at inclination with Dome FixPro: > 3°
Require­ments
  • Permissible module dimensions (L×W×H): 1448-2390 × 950-1170 × 30-50mm
  • Minimum system size D-Dome: 2 supports (4 modules)
  • Clamping at the short module side permitted (see module approvals…)
Technical specifications Base rail
  • Dome 6 Xpress max. 16m
  • Classic 6/Classic 6 LS max. 12m
Technical specifications Module row
  • Dome 6 Xpress max. 16m
  • Classic 6/Classic 6 LS max. 16m
Minimum distance to the edge of the roof 600 mm
Inclination angle 10°/15°
Material
  • Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, DomeClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Windbreaker: Magnelis
  • Mat S protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
K2 Dome 6 System : Description
20/06/2026

System variant

Dome 6 Xpress:

  • 4 assembly steps for super-fast installation
  • Time-saving alignment of the rails with the Dome Speed Spacer gauge
  • Snap-in system for peaks and tool-free rail connectors
Dome 6 Xpress

Dome 6 Xpress LS:

  • 4 assembly steps for super-fast installatio
  • Snap-in system for peaks and tool-free rail connectors
  • For mounting on the long side of the module
  • Only for module width 1134 mm
Dome 6 Xpress LS

Dome 6 Classic:

  • Flexible row spacing
  • Suitable for foil, bitumen, gravel and green roofs
  • Suitable for additional elevation on trapezoidal sheeting
Dome 6 Classic

Dome 6 Classic LS:

  • For mounting on the long module side
  • For module sizes up to 2390 × 1170 mm
  • Based on Dome 6 Classic
Dome 6 Classic LS

K2 Base: Easy, fast and safe planning

Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.

Start planning More