SolidRail System
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 4.40 m. Material: aluminium EN AW-6063 T66
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 4.40 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.
Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 5.50 m. Material: aluminium EN AW-6063 T66
Metal seam clamp with round hole for fixing the K2 SolidRail on metal seam roofs with double standing seam. Clamping range: 3,5 mm. Material: stainless steel A2
S-5! SeamClamp for fastening of K2 SolidRail on double-folded standing seams metal roofs. With socket set screw. With General approval. Material: aluminium
Metal seam clamp with round hole for fixing the K2 SolidRail on metal seam roofs with round seam. Material: stainless steel A2
S-5! SeamClamp for fastening of K2 SolidRail on rounded standing seam metal roofs. Two-part-construction with fitting part. With socket set screw. With General approval. Material: aluminium
Seam clamp for fixing the K2 SolidRail on seam roofs with angled seam or snap seam. Article K2 Adapter plate M10 (2002544) is required for rail mounting. Material: Clamp: Aluminium; Screws: Stainless steel A2
Solar bracket for fixing the K2 SolidRail for Zambelli Rib-Roof Evolution metal roof systems with round seam. Diameter: 23 mm. Material: Aluminium EN AW-6063 T66
Solar bracket for mounting the K2 SolidRail on Zambelli RIB-Roof 465 metal roof systems with standing seam. Opening dimension: 12 mm. Material: Aluminium EN AW-6063 T66
Solar bracket for fixing the K2 SolidRail to Zambelli Rib-Roof Speed 500 metal roof systems with standing seam. Opening dimension: 17 mm. Material: Aluminium EN AW-6063 T66
Stainless steel inlay for aluminium seam-clamps. Use on copper double folded standing seam metal roofs. The inlay avoids electrochemical corrosion between copper roof and aluminium clamp. Material: stainless steel 1.4509
Adapter plate for Hanger Bolt and Solar Fastener M10. 40x90 mm. Material: Aluminium
For quick and easy connection of two K2 SolidRail XS, UltraLight or Light. Set including screws and nuts.
Black anodized universal module end clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.
Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.
Universal module middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM
Universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM
Black anodized universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Black anodized universal middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Anodized aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Module end clamp set for fixing solar modules with frame heights 49-50 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Black anodized module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA. Eloxal may show slight scratches as a result of packaging and transport.
Black anodized module middle clamp XS set for fixing solar modules with frame heights 39-44 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA.
SolidRail System
Suitable for different load cases and many ranges of spans inclusive extensive range of rails.
The SolidRail mounting system for photovoltaic assemblies is suitable for nearly all coverings. This includes pan tiles, plain tiles, slate tiles, trapezoidal sheet metal, corrugated fibre cement, corrugated sheet metal and standing seam roof.
- Comprehensive range of mounting rails for varying load profiles
- Robust, structurally proven
- High flexibility for a diverse range of widths
SolidRail System
Scope of application
We offer roof hooks for almost all clay tiles, pantiles, plain tiles and concrete roof tiles. In the SolidRail range, you will find stainless steel roof hooks for low processing possibilities of the tiles.
For the area of trapezoidal sheet metal and sandwich panel roofing, we have various solar fasteners in our range. These enable the PV mounting system to be fixed in the steel or wooden substructure. The matching calottes in various sizes and colours are also included in the scope of delivery. Our solar fasteners have an abZ (general building authority approval) in Germany.
For corrugated roofing, such as Eternit, we offer hanger bolts and solar fasteners. These are equipped with a seal and some have an abZ (general building authority approval) in Germany. The hanger bolts are used for wooden substructures. They are equipped with an adapter plate to which the rail is attached - pre-assembled, of course. We offer different lengths as well as different diameters (M10/M12).
For a steel substructure, we use solar fasteners. These are equipped with a hardened drill point and also have an abZ in Germany.
For sheet metal seam roofing and system roofs (RibRoof, Domico, Klip-Lok, Klip-Tite), we offer various clamps for fastening. This allows you to build PV systems on almost all of these types of roofing.
The following profile types are possible:
- Double standing seam
- Angled seam and snap seam
- Round seam (Bemo, Kalzip, Aluform)
- Metal roof systems
- Rib-Roof (Evolution, Speed 500, 465)
- Domitec, Klip-Lok and Klip-Tite
SolidRail System
SolidRail System
Downloads
SolidRail System
Videos
Webinar (EN 28.07.2021)
Tiled roofs with roof tile milling machine from Rabied Biedron Diamanttechnik GmbH
SolidRail System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.