Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4,40 m. Material: Aluminium EN AW-6063 T66
Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4,40 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.
Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4,40 m. Material: Aluminium EN AW-6063 T66
Rail connector set as connecting element between two K2 SingleRails 36. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2
Rail connector set as connecting element between two K2 SingleRails 50. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2
For the connection between the concrete foundation and the TiliUp Vento Brace. Material: Aluminium EN AW 6063 T66
Back brace for the TiltUp Vento system. Material: aluminium EN AW 6060 T6; length: 558 mm
Top beam for the TiltUp Vento system. Material: aluminium EN AW 6060 T66; length: 2.36 m
Universal module middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM
Universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM
Black anodized universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Black anodized universal middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Anodized aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Black anodized module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA. Eloxal may show slight scratches as a result of packaging and transport.
Black anodized module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA.
The Fast-installation M K2 slot nut can be put into the K2 rail everywhere*. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: Aluminium, PA. * excluding MiniRail, MicroRail, Dome 6 and Dome V Peak
The Fast-installation M K2 slot nut can be put into the K2 rail everywhere*. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: stainless steel 1.4301, PA. * excluding MiniRail, MicroRail and Dome V & Dome 6 Peak
‘Multi Monti plus’ (Heco) - screw anchor for concrete 7,5x60 hexagon head with combined washer. The certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Material: carbon steel bright zinc plated, A2K
Spring plug DIN 11024. Material: Stainless steel A2-AISI304
Solar Cable Manager with connecting possibility for outdoor-installation. LxW: 200x4.6 mm
Pin for connecting the TiltUp Vento profiles. Material: 1.4301 (X5CrNi18-10) TS520
K2 End Cap for K2 SingleRail 36, SingleRail 36 ight and CrossRail 36. Material: glass fibre reinforced polyamid
The K2 AddOn 30 mounting adapter enables grid or shared-rail installation without additional rails or clamps for module frame heights of 30-34 mm. Fits most K2 SolidRails, CrossRails, SingleRails and SpeedRails. Not suitable for CrossRail 62 & 90 and SolidRail Alpin & XL. Material: glass fibre reinforced polyamide
Many different module arrangements, suitable for larger modules and 3 different elevation angles: 20°, 25° and 30°.
Various roof connections
- Ballasted with concrete foundation: for almost every flat roof
- Direct connection with concrete anchors possible
3 different elevation angles
- All module arrangements in 3 elevation angles available: 20°, 25° and 30°
- Component connections identical throughout
Different module layouts
- Portrait/landscape possible
- Clamping on the short or long side
Few components
- Refined system with well thought-out connections
- Enables systemic storage and flexible application possibilities
Technical data
| TiltUp Vento System | |
|---|---|
| Scope of application | Flat roofs ≤ 3° on concrete, gravelled or green roofs |
| Fastening type / roof fixture |
|
| Requirements |
|
| Technical specifications | Thermal separation after a maximum of 15,5m |
| Inclination angle | 20° / 25° / 30° |
| Material |
|
| Material |
|
Downloads
Video
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.